Jump to main content

Cooktop repair in San Antonio, fixed at your place.

Gas, glass or induction, each kind of cooktop fails in its own way. These are our technicians' notes on finding the fault and keeping your cooktop working.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

1–2 hours
Typical time on site
30
Cooktop faults we fix
31
Brands we service
24/7
Phones answered

Cooktop problems

What is wrong with your cooktop?

Pick a symptom for the usual causes and the fix a technician makes.

  • One cooktop burner won't workThe other burners work fine but one stays cold. Every burner or element has its own valve or switch, so one dead burner usually means a self-contained repair. The fix depends on whether your top is gas, radiant or induction.

    Typical culprits

    • Coil element burnt out or radiant element open
    • Infinite switch for that element failed
    • Gas burner ports blocked by spills
    • Spark electrode cracked on a gas burner
    • Failed induction coil or failed section of the power board

    How the technician handles it

    On coil tops we move a known-good element into that spot to test the socket; on radiant tops we test elements and switches; on gas tops we check the electrode, ports and spark. On induction we read the error history and test the board section for that zone. Only the failed part gets replaced.

  • Gas cooktop burner won't lightYou hear clicking, or nothing, but the burner doesn't catch. If other burners light, the problem is local to that burner. If none light, look at gas supply and power first.

    Typical culprits

    • Burner cap not seated properly
    • Igniter electrode wet or cracked
    • Burner ports clogged with food
    • Spark module failed
    • Gas supply valve closed

    How the technician handles it

    We check the cap and ports, dry and clean the electrode and confirm spark strength. If the spark is weak at every burner, we test the module. We leak-check any fitting we touch.

  • Gas smell at the cooktopA strong or lasting gas smell is an emergency, not a repair to wait on. Shut the burners off if that's safe to do, then get out of the house.

    Typical culprits

    • Burner valve leaking at the stem
    • Loose fitting at the manifold
    • Burner not lighting while gas flows
    • Damaged flex connector
    • Knob bumped partly on

    How the technician handles it

    Once you're out of the house, call the gas utility (CPS Energy serves most of San Antonio) or dial 911 from outside. Leave lights and fans exactly as they are as you go. After the utility clears the home, we find and repair the leak and leak-test every connection.

  • Cracked glass cooktopA crack in a glass top isn't cosmetic. Spills can seep down to the wiring and elements, and the cracked glass may break further. Stop using it until it's replaced.

    Typical culprits

    • Heavy pot dropped on the glass
    • Glass cracked when cold water hit a hot surface
    • Pressure from uneven installation
    • Sugar spill burnt into the glass
    • Cast-iron pan slammed down on the edge

    How the technician handles it

    Turn off the breaker. We check whether the glass top is available for your model and whether the elements underneath were damaged, then quote the repair against the age of the cooktop.

  • Cooktop igniter won't stop clickingThe igniters keep sparking with the burners off, or won't stop after the flame lights. Boil-overs and mopping the top are the usual triggers.

    Typical culprits

    • Moisture in the spark switch
    • Spark switch worn or stuck
    • Cap off its seat, so the flame sensor never sees a flame
    • Spark module fault on reignition models

    How the technician handles it

    We let the switches dry or clean them, check the caps and then test the switches and module. A failed switch or module is replaced.

  • Gas burner flame too low or weakThe flame is small even on high, or water takes forever to boil. If all the burners are weak, the supply or regulator is likely. If just one, the burner or its orifice.

    Typical culprits

    • Burner ports or orifice clogged
    • Regulator failing
    • Wrong orifice for natural gas or propane
    • Low supply pressure

    How the technician handles it

    The burner and orifice get cleaned, the regulator gets checked, and we test the supply pressure. If the cooktop is set up for the wrong gas, we convert it properly.

  • Yellow or orange flame on a gas burnerA healthy gas flame is mostly blue. A lazy yellow or orange flame means poor combustion and can leave soot on pans. A brief orange flicker from dust is normal.

    Typical culprits

    • Burner ports dirty
    • Air shutter out of adjustment
    • Burner cap misaligned
    • Orifice set for the wrong gas type

    How the technician handles it

    We clean the burner, set the cap, adjust the air where possible and check the orifice. If the gas type is wrong, we convert it.

  • Electric cooktop element not heatingOne coil or radiant element won't heat while the rest work fine. The element, its switch or the connection to it has failed.

    Typical culprits

    • Element coil broken
    • Infinite switch failed
    • Coil receptacle burnt
    • Limiter on a radiant element open

    How the technician handles it

    We test the element, switch and receptacle or limiter and replace what failed. We check connections for heat damage.

  • Induction zone not heatingOne induction zone stays cold or flashes an error while the others work. Before calling, try a pan you know works on induction.

    Typical culprits

    • Power board section failed
    • Coil damaged
    • Pan detection sensor faulty
    • Cookware not compatible with induction

    How the technician handles it

    We confirm cookware, read the error history and test the coil and board. Induction parts may need ordering, and you'll know the wait first.

  • Cooktop touch controls not respondingTouch controls ignore your finger, respond to the wrong key or beep randomly. Water and residue on the glass are common culprits.

    Typical culprits

    • Moisture or residue on the touch panel
    • Control lock active
    • Touch control board failed
    • Ribbon cable loose

    How the technician handles it

    We clean and dry the panel, check the lock and test the touch board and cable. A failed board is replaced.

  • Cooktop element heats unevenlyFood scorches in the center and stays raw at the edges, or one side of the pan stays cool.

    Typical culprits

    • Warped cookware
    • Radiant element partly broken
    • Dual-element section not working
    • Gas burner ports partly blocked

    How the technician handles it

    We check the element or burner and test with a flat pan. If cookware is the issue, we'll say so.

  • Cooktop element stays on when turned offAn element that keeps heating after you switch it off is a fire risk. Turn off the breaker now.

    Typical culprits

    • Infinite switch contacts welded
    • Control board relay stuck
    • Wiring short
    • Touch control shorted by moisture

    How the technician handles it

    With power off, we test the switch, relay and wiring and replace the failed part. We confirm every element turns off before leaving.

  • Cooktop element switch faultyThe switch behind the knob controls the element. A bad one can mean no heat, only high heat or intermittent heat.

    Typical culprits

    • Switch contacts burnt
    • Switch shaft broken
    • Loose wire at the switch
    • Burnt terminal from a loose connection

    How the technician handles it

    We test the switch and its wiring and replace the switch and any burnt terminals.

  • Cooktop element only works on highThe element is either off or full blast, with nothing in between. The switch that cycles it on and off has stuck.

    Typical culprits

    • Infinite switch stuck
    • Switch contacts welded
    • Control fault on electronic models
    • Wrong replacement switch fitted

    How the technician handles it

    We test and replace the switch with the correct part for your model, or test the control on electronic tops.

  • No spark from the cooktop igniterNo click, no spark. If one burner is affected, it's that igniter. If all are, the module or power is the likely problem.

    Typical culprits

    • Igniter porcelain cracked
    • Spark module failed
    • Wire to the igniter loose
    • Igniter tip too far from the burner

    How the technician handles it

    We test the igniter, wire and module and replace the failed part. Until then, if you're comfortable with it, a long match will light the burner.

  • Cooktop burner valve stiff or leakingA knob that's hard to turn, or a gas smell near one knob, points to the burner valve. A leaking valve needs immediate attention.

    Typical culprits

    • Valve stem seized
    • Valve seat worn
    • Grease inside the valve dried out
    • Valve leaking at the stem

    How the technician handles it

    The gas gets shut off, the valve is replaced, and the manifold is leak-tested. If you smell gas strongly, leave and call the gas utility first.

Show 14 more cooktop problems
  • Cooktop control knob brokenWhen a knob is cracked or worn and slips, controlling the flame or even shutting the burner off can get hard.

    Typical culprits

    • Knob insert worn
    • Knob cracked
    • Valve or switch shaft damaged
    • Knob melted by heat

    How the technician handles it

    We replace the knob and check the shaft. A damaged shaft means the valve or switch gets replaced.

  • Hot surface light stuck on or offThe hot surface light warns you a glass top is still hot. If it stays on or never lights, it's no longer a reliable warning.

    Typical culprits

    • Light or LED failed
    • Limiter switch stuck
    • Control board fault
    • Wiring loose

    How the technician handles it

    We test the light, limiter and control and replace the failed part.

  • Induction cooktop won't detect the panThe zone flashes and won't heat when you set a pan on it. Most of the time, the pan is the issue.

    Typical culprits

    • Cookware that isn't magnetic
    • Pan smaller than the zone
    • Pan detection circuit failed
    • Pan base warped

    How the technician handles it

    Hold a magnet to the pan bottom; a firm grip means it should work on induction. If good pans aren't detected, we test the detection circuit and board.

  • Induction cooktop showing an error codeInduction tops report problems with codes. Some clear on their own once things cool. Others point to a board or sensor.

    Typical culprits

    • Overheating
    • Sensor fault
    • Power board fault
    • Communication fault between boards

    How the technician handles it

    After looking up your model's code, we check the cooling path and test the related boards and sensors.

  • Induction cooktop buzzing loudlySome hum is normal on high power. A loud buzz or rattle usually comes from the pan, though a fan or coil can be at fault.

    Typical culprits

    • Lightweight or layered pan
    • Cooling fan worn
    • Loose coil
    • Pan not sitting flat

    How the technician handles it

    We test with a heavy flat pan, check the fan and coil mounts and fix what is loose or worn.

  • Cooktop has no powerNothing lights or heats. Check the breaker first. Storms and outages are common triggers.

    Typical culprits

    • Breaker tripped
    • Terminal block burnt
    • Main fuse on the board blown
    • Control board failed
    • Surge damage after a storm

    How the technician handles it

    The supply, terminal block and board fuse get checked first, then the control is tested. Burnt connections are replaced.

  • Glass cooktop scratched or stainedScratches and stains are mostly cosmetic, but deep scratches can weaken the glass.

    Typical culprits

    • Cast-iron or rough pans dragged
    • Abrasive cleaner
    • Burnt-on sugar
    • Grit under the pan

    How the technician handles it

    We'll show you how to clean the glass safely. If the glass is damaged, we quote a replacement top.

  • Cooktop lock won't releaseThe lock symbol stays on and nothing responds. Usually you just need to hold the right key long enough.

    Typical culprits

    • Lock turned on
    • Touch panel fault
    • Control board fault
    • Water on the lock key

    How the technician handles it

    We release the lock, show you how and test the panel and board if it won't release.

  • Gas burner flame uneven or liftingThe flame burns tall on one side and is missing on the other, or it lifts off the burner. A cap that isn't sitting right is often the reason.

    Typical culprits

    • Cap not seated flat
    • Cap from a different burner
    • Burner head warped
    • Food stuck under the cap

    How the technician handles it

    We clean and reseat the caps, check the head and replace warped parts.

  • Burners wrong after propane conversionTall yellow flames, soot, weak flames or burners that won't simmer often follow an incomplete conversion. This is a safety issue.

    Typical culprits

    • Wrong orifices
    • Regulator not converted
    • Simmer screws not adjusted
    • Oven not converted along with the cooktop

    How the technician handles it

    After checking the orifices, regulator and simmer settings, we finish the conversion and leak-test all of it.

  • Coil element socket burntA coil element that sparks, flickers or only works when wiggled usually has a burnt socket. Burnt sockets can damage the new element if left.

    Typical culprits

    • Loose element connection
    • Socket terminals corroded
    • Element left wobbly
    • Spills reaching the socket

    How the technician handles it

    We replace the socket and usually the element, and check the wiring for heat damage.

  • Induction cooktop cooling fan failedInduction electronics need airflow. Without the fan, the top overheats and shuts zones off.

    Typical culprits

    • Fan motor failed
    • Fan blocked by debris
    • Vent under the cooktop blocked
    • Fan wiring loose

    How the technician handles it

    We test and replace the fan and check that the cabinet below allows airflow.

  • Cooktop downdraft vent not workingThe downdraft won't rise, or rises but doesn't pull smoke.

    Typical culprits

    • Lift motor failed
    • Fan motor failed
    • Switch faulty
    • Filter clogged with grease

    How the technician handles it

    The lift motor, fan motor and switch are tested, the filter is cleaned or replaced, and the failed part is repaired.

  • Induction zone turns off by itselfA zone heats and then shuts off after a few minutes. That is usually a protection kicking in.

    Typical culprits

    • Overheating from a blocked vent
    • Cooling fan weak
    • Temperature sensor fault
    • Auto-off timer

    How the technician handles it

    We check the cooling path and fan, test the sensor and look at timer settings. Then we fix what's causing the shutdown.

Brands

Cooktop brands we repair

All brands →
  • Samsung logo
  • LG logo
  • Whirlpool logo
  • GE Appliances logo
  • Maytag logo
  • Bosch logo
  • KitchenAid logo
  • Frigidaire logo
  • Viking logo
  • Kenmore logo
  • Amana logo
  • Electrolux logo
  • Miele logo
  • Thermador logo
  • Wolf logo
  • Admiral logo
  • AGA logo
  • Avanti logo
  • Bertazzoni logo
  • Blomberg logo
  • Dacor logo
  • DCS logo
  • Fisher & Paykel logo
  • Gaggenau logo
  • Hotpoint logo
  • JennAir logo
  • La Cornue logo
  • Roper logo
  • Smeg logo
  • Thor Kitchen logo
  • Vulcan logo

From our technicians

Cooktop repair notes for San Antonio homes

On every cooktop call we first ask which type it is, since the three kinds share almost nothing beneath the surface. A gas top is plumbing and a spark system. Under the glass of a radiant top sit several heating elements, each controlled by its own switch. Induction is electronics: a power board drives copper coils that make the pan itself heat up.

That means a burner that won't heat has a very different list of likely causes depending on the type. On gas, the usual suspects are a wet or cracked igniter, a cap knocked out of place, or clogged ports. On a radiant top, an element or switch. On induction, a pan the zone can't detect, a board section or the cooling fan.

San Antonio adds a few local wrinkles. Some homes cook on CPS Energy natural gas, many newer ones are all-electric, and Hill Country homes often run on propane. Kitchens in Alamo Heights and Terrell Hills have plenty of pro-style gas tops, while newer builds lean toward glass and induction.

Gas tops: spark, flame and fuel

Most gas cooktop calls involve ignition. Boil-overs and mopping drip into the burner base and soak the spark switches or igniters, which leads to clicking that won't stop or no spark at all. Often letting it dry out for a day solves it. If not, the switch or module has failed. A burner cap sitting slightly crooked causes uneven flames and can keep the igniter from lighting the burner.

Flame color tells you about combustion. A blue flame with small, steady tips is healthy. Soot from a tall, lazy yellow flame points to dirty ports, a cap out of line, or an orifice that doesn't match the gas type. That last one is common in the Hill Country, where propane is often used. A cooktop that was never converted, or was only partly converted, will burn badly.

Radiant glass and induction: a different checklist

On radiant tops we test the element, then the switch behind the knob, then the limiter that protects the glass. When a switch fails, an element may stick on high or refuse to turn off, so shut it off at the breaker until it's repaired. A cracked glass top needs replacing, because spills can reach the wiring underneath.

Induction calls often start with cookware. Induction needs a magnetic pan: if a magnet won't grip the bottom firmly, the pan won't heat. Beyond that, induction tops depend on their cooling fan. A cooktop shuts zones off when it overheats, which happens if the cabinet underneath is crammed full or the cooling fan is clogged. Error codes help a lot with induction, so note them before you call.

Storms, surges and holiday cooking

Spring storms and outages can damage touch controls and induction boards. When the cooktop misbehaves after the power returns, switch its breaker off for about a minute and back on. If it still misbehaves, a board may be damaged. Turning the breaker off during a long outage protects the electronics from the surge when power returns.

Holidays and Fiesta gatherings put a cooktop through hours of heavy use with big pots. That is when weak switches fail, igniters get soaked by boil-overs and glass gets chipped. A quick look at your burners and controls before a big cooking day can save you a scramble.

Safe owner care and when to call

Smell gas? Leave the light switches alone and don't light anything. Get out of the house, then call the gas utility (CPS Energy for most of San Antonio) or 911. Before you clean or touch anything below the cooktop, cut power at the breaker on electric and induction tops; on a gas top, shut off the power and the gas valve too.

Owners can safely clean burner caps and heads, clear ports with a straight pin, let wet igniters dry, use the right cleaner on glass and keep the space under an induction top open for airflow. Leave valves, switches, boards and conversions to a technician. As for repairing or replacing, burners, igniters, switches and elements are nearly always worth the fix. Replacement can make more sense mainly on an older model with cracked glass or a dead induction board, and we'll say so plainly.

Questions

Cooktop repair questions

Why does my gas cooktop keep clicking?

Usually moisture from a boil-over or cleaning has reached the spark switch or igniter. Leave it off for a while to dry. Clicking that won't stop usually means a failed switch or spark module, and we can replace either one.

Why won't my induction cooktop work with some pans?

Induction needs magnetic cookware. A pan whose bottom a magnet won't grip firmly won't heat on induction. Pans that are too small or warped may also not be detected.

Can my gas cooktop run on propane?

Most can, with the right conversion: new orifices, a regulator change and simmer adjustments. If your home uses propane, as many Hill Country homes do, make sure the cooktop was converted properly. A partial conversion is a safety risk.

My cooktop smells like gas. What do I do?

Don't touch any switches; get out of the house, then call the gas utility (CPS Energy serves most of San Antonio) or 911 from outside. We can repair the cooktop after the utility makes the home safe.

Is a cracked glass cooktop dangerous?

Yes. Spills can reach the wiring below and the crack can spread. Keep that breaker off, and don't cook on it until new glass goes in.

What does a cooktop repair visit look like?

You get a three-hour arrival window. The technician identifies the type, tests the affected burner or zone and finds the fault. You sign off on one parts-and-labor price before we start, and each gas repair is leak-tested at the end.

Need your cooktop looked at?

Phone us at any hour, or send the online form and we ring back to set your three-hour window.

Call now, 24/7(210) 939-3313Book online