Jump to main content
Kenmore logo

Kenmore appliance repair in San Antonio, TX.

Every Kenmore was built by another company. The model number's first three digits reveal which company it was, and that determines the parts, the codes and how it gets repaired.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Everyday brands

Kenmore appliances we repair

What fails most on Kenmore

  • Model prefix revealing an unexpected manufacturer
  • Parts sourced through the original maker's catalogue
  • Worn couplers and drain pumps on washers built by Whirlpool
  • Defrost failures on refrigerators
  • Lid switch or door lock faults

Kenmore, plainly

What usually goes wrong

Kenmore started life as the Sears store brand, and other manufacturers built every appliance that wore the name. If your home has one, it is most likely a dishwasher, refrigerator, dryer or washer that has been in the family for years.

  • Washer

    Water fills the tub but the drum never spins and the load comes out dripping.

    On many older top-loaders the coupler between the motor and transmission has worn through. In other cases a lid switch that no longer senses the lid is stopping the spin.

  • Dryer

    The drum tumbles and the timer counts down, but clothes stay cool and damp.

    Most often the heating element or a safety fuse has failed, and a lint-choked vent is frequently what blew that fuse to begin with.

  • Refrigerator

    The freezer is cold, yet the milk on the fridge side is lukewarm.

    Frost has usually covered the freezer coil and blocked the air that should flow to the fresh-food section. The compressor is probably fine; the defrost system is the likely culprit.

  • Dishwasher

    When the cycle finishes, water is still sitting in the bottom of the tub.

    A kinked drain hose or a clogged filter is usually behind it. If neither is blocked, we test the drain pump next.

Check this before you call

  1. Before you call, check the breaker panel and flip back any tripped breaker serving the range or dryer.
  2. Pull the bottom filter from the dishwasher and rinse the trapped grease and food off it.
  3. Open both washer supply valves fully, since a half-closed valve causes slow fills.
  4. Empty the lint screen, then slide the dryer out and see whether the vent hose behind it got crushed.

From our technicians

Working on Kenmore equipment

The most important thing on a Kenmore is a number on a sticker. Sears never built its own appliances. Whirlpool, LG, Frigidaire and Electrolux, GE, Panasonic and others built them under contract, and the model number's first three digits reveal which company made yours. A 110 is a Whirlpool inside. A 795 is an LG. A 253 is a Frigidaire or Electrolux.

Once we know the maker, there is nothing mysterious about a Kenmore. It has that company's design, its common faults and its parts. With Sears stores largely gone, those parts now come through the original maker's channels, and they are generally easy to get.

Across San Antonio we repair Kenmore and Kenmore Elite microwaves, cooktops, ovens, ranges, dishwashers, dryers, washers, freezers and refrigerators.

What sets Kenmore apart

Kenmore began as the Sears house brand and never manufactured its own appliances; today the brand belongs to Transform Holdco. Whirlpool, LG, Frigidaire and Electrolux, GE, Panasonic and others built Kenmore models under contract. Which company really built a Kenmore is coded at the start of its model number: 110 points to Whirlpool, 795 to LG, and 253 to either Frigidaire or Electrolux. Once the maker is known, a Kenmore is serviced with that maker's codes, parts and procedures.

On a Kenmore, we ask for the full model number first, since its prefix shows which company's design is under the badge and which parts fit. We cross the Kenmore number to the original manufacturer's catalogue, which is where most Kenmore parts come from now. With that settled before the visit, the technician can load the right parts and the repair follows the original maker's playbook.

Read the prefix before anything else

Give us the full model number when you book, including the three digits before the dot. A Whirlpool-built Kenmore washer will most likely need a coupler, lid switch or pump. An LG-built Kenmore refrigerator may need its inverter board tested before anyone talks about the compressor. A Frigidaire-built one has its own oven and dishwasher codes. Without the prefix, the technician arrives guessing.

Kenmore Elite models often used the maker's higher-end parts, so the prefix matters even more there.

Long-lived Kenmores in San Antonio homes

Many Kenmore washers and dryers in older ranch homes and in garage laundry rooms have run for years. An uninsulated garage gets hot enough to wear down hoses, seals and electronics, and a hard freeze like the one in February 2021 can crack a water line or split a washer hose. If yours lives in the garage, check the hoses each spring and fall.

Kenmore dryers that vent through the attic run into the same problem as every other brand here: long, hot runs packed with lint, a tripped thermal fuse, and longer and longer drying times. We clear what we can reach and tell you if the full vent needs cleaning.

When a Kenmore is worth fixing

A belt, switch, pump, element or defrost part on a solid Kenmore is usually a good repair. When an older refrigerator's sealed system fails, or a machine at the tail end of its life suffers a major breakdown, we say so directly, because buying new may be wiser. The decision is always yours, and the quote comes before any work.

Questions

Kenmore repair questions

Who actually built my Kenmore?

Look at the model number. The maker is coded in the digits just before the dot: Whirlpool uses 110, LG uses 795, and Frigidaire or Electrolux uses 253, for example.

My Kenmore shows a code I cannot find in the manual. Can you read it?

Usually, yes. Once we know the original maker from the prefix, the code follows that maker's system.

Are Kenmore Elite appliances harder to repair?

Not really. They tend to use the original maker's higher-end parts, which are still sourced through that maker. The model number tells us which ones.

With Sears mostly gone, can my Kenmore still be repaired?

In most cases, yes. The parts were always made by the company that built the machine, and once we know which company that is, getting the part is routine.

Is it worth fixing my old Kenmore?

That depends on its age and what broke. A belt, switch or pump on a sound machine is usually worth it. Should a major repair come up on an appliance that is close to worn out, we will tell you that straight.

Kenmore acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online