Microwave repair in San Antonio, fixed at your place.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
- 1–2 hours
- Typical time on site
- 30
- Microwave faults we fix
- 27
- Brands we service
- 24/7
- Phones answered
Microwave problems
What is wrong with your microwave?
Pick a symptom for the usual causes and the fix a technician makes.
Microwave not heating foodEverything looks normal: the light comes on, the tray turns, the timer runs. The food is still cold at the end. It means no microwave energy is coming from the high-voltage section, and since those parts can injure you, this isn't a DIY repair.
Typical culprits
- Failed high-voltage diode
- Burned-out magnetron
- Failed high-voltage capacitor
- Door switch breaking the heating circuit
- Magnetron thermal protector tripped open
How the technician handles it
Unplug and do not open the cabinet. Once the capacitor is safely discharged, the door switches are tested first; after that the technician meters the magnetron, capacitor and high-voltage diode and replaces the one that failed.
Microwave sparking insideFlashes, bright sparks or a crackling sound inside the cavity. Stop using it right away; arcing can ruin the magnetron and start a fire.
Typical culprits
- Burned food splatter on the waveguide cover
- Chipped interior paint exposing bare metal
- Metal rack used in the wrong position or mode
- Dish with metallic trim
How the technician handles it
Unplug the microwave. The technician replaces a burned waveguide cover, repairs chipped cavity paint with the correct microwave-safe coating, and checks the magnetron for damage.
Microwave turntable not turningThe glass tray stays still, so food heats unevenly. Usually the tray or ring is off its track or the motor has failed.
Typical culprits
- Tray not sitting on the drive coupler
- Burned-out turntable motor
- Roller guide under the tray dirty or cracked
- Cracked coupler
How the technician handles it
Reseat the tray and clean the roller ring. If it still does not turn, the technician replaces the motor or coupler.
Microwave door won't closeThe door will not latch, or the microwave does not recognize it as closed. Never force or bypass the latch.
Typical culprits
- Broken door hook
- Missing latch spring
- Door out of line on its hinges
- Cracked interlock switch holder
How the technician handles it
The technician replaces broken hooks or springs, realigns the door and verifies the interlock switches before returning the microwave to service.
Microwave display blank or flickeringThe display is dark or flickers, and the microwave may not respond at all. Power surges after storms often cause this.
Typical culprits
- Blown main fuse
- Failed power supply on the control board
- Dead display board
- Surge damage
- Bad door switch that took out the fuse
How the technician handles it
The technician checks the fuse and what caused it to blow, tests the power supply and replaces the board if needed.
Microwave making loud noiseGrinding, buzzing or a loud hum louder than normal. A deep, rough hum can mean a failing magnetron.
Typical culprits
- Worn turntable motor
- Loose cooling fan blade
- Worn vent fan bearing
- Magnetron starting to fail
How the technician handles it
The technician isolates the noise and replaces the motor, fan or magnetron.
Microwave won't start when I press startThe display works but pressing start does nothing. A door switch or lock setting is usually involved.
Typical culprits
- Door switch not registering a closed door
- Child lock turned on
- Start key dead
- Control board misreading inputs
- Overheat cutout tripped open
How the technician handles it
Check the child lock. The technician tests the door switches, keypad, thermal cutout and board.
Microwave keeps running with the door openThe microwave keeps running or heating with the door open. Pull the plug now and leave it unused until the repair is done.
Typical culprits
- Interlock switch contacts welded shut
- Failed monitor switch
- Relay on the control board stuck closed
- Broken switch actuator leaving a switch held in
How the technician handles it
Unplug immediately. The technician replaces the failed switches or relay and verifies the full interlock system before the microwave goes back into service.
Microwave buttons not workingSome or all buttons do not respond. The touchpad or its connection is usually the cause.
Typical culprits
- Worn keypad membrane
- Loose ribbon cable
- Failed control board
- Moisture inside the panel
How the technician handles it
The technician checks the ribbon cable and tests the keypad and board.
Microwave light not workingThe interior or cooktop light stays off. Usually a bulb, sometimes a socket or switch.
Typical culprits
- Burned-out bulb
- Heat-damaged socket
- Failed light relay on the control
- Bad cooktop light switch on an over-the-range model
How the technician handles it
Replace the bulb if it is user-accessible. The technician tests the socket, switch and relay if a new bulb does not work.
Microwave tripping the breakerThe breaker trips when the microwave starts heating. It may be a shorted part, or the circuit may be overloaded.
Typical culprits
- Shorted high-voltage diode or capacitor
- Shorted magnetron
- Too many appliances on one kitchen circuit
- Failed door switch shorting the line
How the technician handles it
Try running the microwave with nothing else on the circuit. If it still trips, the technician tests the high-voltage parts and door switches.
Microwave showing an error codeThe microwave shuts down and an error code shows up on its display. Codes point to a sensor or circuit.
Typical culprits
- Bad humidity or steam sensor
- Shorted keypad
- Faulty thermistor
- Control board misreading inputs
How the technician handles it
Note the code. The technician looks it up for your model and tests the indicated part.
Burned spot inside the microwaveA dark spot appears on the small panel on the side wall of the cavity. It can spark and eventually damage the magnetron.
Typical culprits
- Grease and splatter soaked into the cover
- Microwave run with nothing inside
- Cover never cleaned
- Cracked cover
How the technician handles it
The technician replaces the waveguide cover and checks the waveguide and magnetron for damage.
Microwave door switch failedThe microwave will not start, stops when bumped, or blows its fuse. Door switches are safety parts and must be replaced correctly.
Typical culprits
- Worn switch contacts
- Broken switch actuator
- Door hooks no longer pressing the switch
- Cracked switch holder
How the technician handles it
The technician replaces the switches and verifies the interlock sequence.
Microwave door handle brokenThe handle is loose, cracked or no longer opens the door.
Typical culprits
- Loose handle screws
- Cracked plastic handle
- Broken latch lever
- Broken spring in the release button
How the technician handles it
The technician replaces the handle or latch parts and checks door alignment.
Microwave cooling fan not runningThe cooling fan for the magnetron and control electronics is no longer running. The microwave may shut off from overheating.
Typical culprits
- Dead fan motor
- Blade loose or blocked
- Loose fan wiring
- Thermal cutout tripping from lack of airflow
How the technician handles it
The technician replaces the fan motor or blade and checks the thermal cutout.
Show 14 more microwave problems
Microwave grease filters cloggedThe vent fan does not clear smoke and grease well. Over-the-range filters collect grease from the cooktop below.
Typical culprits
- Filters never washed
- Lots of frying on the burners below
- Bent or damaged filters
- Grease built up inside the vent
How the technician handles it
Pop the grease filters out and let them sit in hot, sudsy water, or put them in the dishwasher when your manual says that's okay. Replace bent filters.
Microwave charcoal filter needs replacingCooking odors linger. On recirculating installs, the charcoal filter absorbs smells and wears out over time.
Typical culprits
- Filter well past its service life
- Missing grease filter letting grease reach the charcoal
- Wrong filter for the model
- Unit set up for outside venting but fitted with a recirculating filter
How the technician handles it
Replace the charcoal filter with the correct one. The technician can confirm whether the vent is set up for recirculating or outside venting.
Microwave vent fan not workingNo matter which speed you pick, the vent fan stays off. It is separate from the cooling fan.
Typical culprits
- Burned-out vent motor
- Faulty fan switch
- Stuck damper
- Failed control relay
How the technician handles it
The technician tests the motor, switch and relay, and replaces the failed part.
Microwave heats sometimes but not othersHeating works on certain cycles but not on others. Intermittent faults are often a door switch or overheating.
Typical culprits
- Door switch cutting in and out
- Magnetron overheat switch opening
- High-voltage terminal working loose
- Magnetron losing output
How the technician handles it
The technician discharges the circuit, tests the switches, cutouts and connections, and checks magnetron output.
Microwave stops after a few secondsThe microwave starts and then shuts off. It is often overheating or losing the door signal.
Typical culprits
- Thermal cutout tripping from heat
- Door switch dropping out
- Dead cooling fan
- Vents blocked
How the technician handles it
Clear the vents. The technician tests the cutouts, fan and door switches.
Microwave smells like burning plasticA burning smell that is not from food. Stop using the microwave and unplug it, because wiring or parts may be overheating.
Typical culprits
- Grease-soaked waveguide cover scorching
- Wiring insulation getting too hot
- Failing fan letting parts overheat
- A plastic container softening in the cavity
How the technician handles it
Unplug. The technician inspects the cavity, wiring and fans and replaces damaged parts.
Microwave shutting off from overheatingPartway through cooking the microwave quits, then works again once it has cooled down. The cooling system cannot keep up.
Typical culprits
- Vents blocked by cabinets or clutter
- Weak cooling fan
- Thermal cutout tripping early
- Dust built up inside
How the technician handles it
Clear the vents. The technician tests the fan and cutouts and cleans internal dust.
Microwave vent fan turns on by itselfThe vent fan runs even when the microwave is off. On over-the-range models, that is often a protective feature.
Typical culprits
- Heat from the cooktop below switching the fan on, which is normal
- Fan thermostat stuck closed
- Stuck relay on the control
- Control board fault keeping the fan powered
How the technician handles it
Before calling it a fault, remember that many microwaves mounted over a range kick their fan on by design once the burners below get hot, so the electronics stay protected. If the fan keeps running with the cooktop cold, the technician tests the thermostat and relay and replaces the stuck one.
Inverter microwave runs but won't heatOn inverter models, an electronic board takes the place of the transformer in powering the magnetron. When the inverter fails, the microwave runs but does not heat.
Typical culprits
- Failed inverter board
- Fuse blown by the inverter fault
- Burned-out magnetron
- Damaged wiring between inverter and magnetron
How the technician handles it
The technician tests the inverter, magnetron and wiring and replaces the failed part.
Microwave popping or cracklingPopping or crackling sounds while heating. Some come from food; others are arcing.
Typical culprits
- Sparks jumping at the waveguide opening
- Chipped paint inside the cavity
- A high-voltage part breaking down
- Food skins or fat splattering
How the technician handles it
Stop using it if you see sparks. The technician inspects the cavity, waveguide and high-voltage parts.
Microwave power levels not workingFood heats the same no matter the power level. The microwave is not cycling or modulating power.
Typical culprits
- Power relay that never opens
- Inverter not varying its output
- Control board misreading inputs
- Keypad not registering the power setting
How the technician handles it
The technician tests the relay, inverter and keypad.
Microwave sensor cook not workingSensor cook settings stop early, run long or give an error. The humidity sensor detects steam from food.
Typical culprits
- Faulty humidity sensor
- Grease coating the sensor
- Control board misreading inputs
- Food covered so tightly that steam can't reach the sensor
How the technician handles it
Vent the cover on food. The technician tests and cleans or replaces the sensor.
Microwave child lock won't turn offThe microwave is locked and the usual unlock does not work.
Typical culprits
- Lock switched on by accident
- Keypad button stuck down
- Control board glitch
- Wrong unlock sequence for that model
How the technician handles it
Check the manual for the unlock sequence. If it stays locked, the technician tests the keypad and the control board.
Microwave paint peeling insidePaint inside the cavity chips or peels, exposing metal. Exposed metal can spark.
Typical culprits
- Years of steam and heat
- Harsh scrubbing or cleaners
- Rust starting under spills
- Arcing burning the paint off
How the technician handles it
Stop using it if metal is exposed. The technician can touch up small areas with microwave-safe cavity paint; rust-through usually means replacement.
Brands
Microwave brands we repair
From our technicians
Microwave repair notes for San Antonio homes
Start with the warning, because it matters more than anything else on this page. Even unplugged, a microwave can keep a lethal charge stored in its high-voltage capacitor. The magnetron, transformer and diode run at voltages far beyond a household outlet. Opening the outer cabinet is not a safe home repair.
That leaves plenty you can do: clean the waveguide cover, swap grease and charcoal filters, check the turntable, reset a tripped breaker. Everything past that belongs to someone with the training and tools to discharge the circuit and test it safely.
Most of our microwave calls are for over-the-range units, built-ins and drawer models, which are installed and wired into the kitchen and are worth fixing. Countertop microwaves are repairable too, though we'll be honest when buying a new one is the smarter call.
Why we tell you not to open it
The capacitor in a microwave's high-voltage circuit stores energy, and it does not always bleed off after unplugging. A technician discharges it properly before touching anything inside. Without that step, a screwdriver or a curious hand can take a shock that can kill.
Door interlocks are the other safety line. Before a microwave will heat, a set of switches has to confirm the door is shut and latched. Never bypass, jump or tape one of them, even to test. Running with the door open makes a microwave a serious hazard; keep it unplugged until it's fixed. After any repair involving the door, we verify the interlocks work in the right sequence before leaving.
Drawer, built-in and over-the-range units
Mounted above the cooktop, this type of microwave does double duty as your hood, so it carries its own exhaust fan and grease filters, and recirculating setups usually add a charcoal filter. Heavy cooking on the burners below sends heat and grease up into it. Clogged filters, a failing vent motor and heat-related shutdowns are common. If the vent fan turns itself on, that is often a built-in feature responding to heat from the cooktop, not a fault.
Built-in and drawer models sit in cabinetry and depend on proper ventilation clearances. They are often paired with wall ovens in remodeled kitchens, and their parts can take time to arrive. We tell you the wait before you decide.
How a no-heat call gets diagnosed
If the microwave runs, lights and turns the plate but food stays cold, the problem is nearly always in the door switches or the high-voltage circuit. After discharging the capacitor, the technician tests the door switches first, since a failing one can cut the heating circuit while letting the light and turntable run. Next come the high-voltage diode, capacitor and magnetron, plus the inverter board on inverter models.
A blown main fuse is another common finding. Fuses often blow because something else failed, like a door switch or a shorted diode. Replacing only the fuse sends you back to the same problem, so we find what took it out.
Storms, circuits and San Antonio kitchens
Spring thunderstorms and the outages that come with them send surges through kitchen circuits. Microwaves with electronic controls can come back with a blank display, unresponsive buttons or a blown fuse. Surge protection helps, either at the panel for the whole house or a quality plug-in unit, and after a storm that made the kitchen lights flicker, test the microwave first.
In older Monte Vista and Tobin Hill homes, or the ranch houses inside the loop, the microwave may be on a shared circuit with other kitchen appliances. If the breaker only trips while the toaster or coffee maker is also on, the circuit is probably overloaded and the microwave itself is likely fine. If it trips on its own, it needs diagnosis.
What you can do, and whether to repair
Keep the cavity clean, especially the waveguide cover, which is a small panel on the side wall. It soaks up grease and food splatter, which can burn and cause sparking. If you cook on the range a lot, wash the grease filters every month, and change the charcoal filter when it's due. Never run the microwave empty, and never use metal unless the manual allows it for a specific rack.
For microwaves installed in cabinets, drawers or above the range, repairing a fan, door switch, diode, capacitor or board generally pays off, and a magnetron can too on a higher-end model. A major failure in a basic countertop unit often tips toward replacing it. You will know which side we lean toward, and the single all-in price, before a panel comes off for the repair, and the diagnostic fee counts toward it.
Questions
Microwave repair questions
My microwave runs but does not heat. What is wrong?
The usual failure is a door switch, the magnetron, or the high-voltage diode or capacitor. Don't open the cabinet to look, because these parts carry dangerous voltage. A technician discharges the circuit and tests each one.
Is it dangerous if my microwave sparks?
Stop using it right away. Sparking usually comes from a dirty or burned waveguide cover, chipped paint in the cavity or metal inside. Pull the plug and keep it out of service until a technician has looked at it.
Is a microwave door switch something I can swap out on my own?
We do not recommend it. Door switches are part of the safety interlock system, and they must be installed and tested in the right sequence. The work also happens near the high-voltage circuit.
Why would the microwave above my range switch its vent fan on without me touching it?
On many over-the-range units, a thermostat starts the vent fan once the cooktop below heats up, which keeps the electronics from overheating. It should turn off once things cool. A fan that keeps running with a cool cooktop may have a stuck thermostat or relay.
My microwave stopped working after a storm. Can it be fixed?
Often, yes. After a power surge we commonly find a fuse blown or the control board damaged. A technician finds what failed and whether anything else took damage.
Is it worth repairing a microwave?
Usually yes for drawer, built-in and over-the-range units. For an inexpensive countertop unit, a major part like the magnetron often costs too much to make sense. You get our honest take up front, before any money changes hands.
Where we go
Microwave repair across the San Antonio area
- Downtown, Southtown & King William
- Alamo Heights & Terrell Hills
- Monte Vista, Tobin Hill & Olmos Park
- Woodlawn Lake & Balcones Heights
- East Side, Kirby & Fort Sam Houston
- West Side, Port San Antonio & Lackland
- Highland Park & Southeast San Antonio
- South Side & the Missions
- Medical Center & Oak Hills
- Leon Valley
- Castle Hills & North Central
- Shavano Park & Hunters Creek
- Hollywood Park & Thousand Oaks
- Stone Oak & Timberwood Park
- Windcrest & Northeast San Antonio
- Live Oak
- Universal City
- Converse
- Helotes & Braun Station
- UTSA Area & Great Northwest
- Alamo Ranch & Westover Hills
- The Dominion & Leon Springs
- Von Ormy, Atascosa & South Bexar
- Adkins, St. Hedwig & Elmendorf
- Schertz
- Cibolo
- Seguin & Marion
- Bulverde
- Garden Ridge
- New Braunfels
- Canyon Lake & Spring Branch
- Boerne, Fair Oaks Ranch & Bergheim
- Castroville, La Coste & Medina Lake
- Hondo
- Pipe Creek
- La Vernia
- San Marcos
Other appliances
Need your microwave looked at?
Phone us at any hour, or send the online form and we ring back to set your three-hour window.