Jump to main content
Dacor logo

Dacor appliance repair in San Antonio, TX.

Dacor changed hands in 2016, so the age of your unit decides where its parts come from and how the repair is approached.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Built-in & pro-style

Dacor appliances we repair

What fails most on Dacor

  • Different parts sources for pre- and post-2016 models
  • Touch control, keypad or display board failure
  • Oven temperature sensor drift or calibration error
  • Burner ignition faults on pro-style ranges
  • Worn hinges or gaskets on built-in wall ovens

Dacor, plainly

What usually goes wrong

Dacor started out as a luxury kitchen brand in California, and Samsung has owned it since 2016. Most owners have a pro-style range, wall oven or built-in fridge column that arrived as part of a full kitchen design.

  • Oven

    The display says the oven is at temperature, but dishes keep coming out over- or underdone.

    The temperature sensor is usually reading a little off, or the oven needs recalibrating. We measure real heat against the display before deciding which.

  • Range & Stove

    It lights, but the flame quits the second the knob is released.

    Often a spill has gummed up the igniter, or the cap sits slightly out of place. If both check out, the flame-sensing or ignition parts need work.

  • Refrigerator

    The built-in column is running warm and its fan is louder than normal.

    Usually a dusty condenser in the top or bottom grille, or an evaporator fan beginning to fail.

  • Microwave

    Some touch keys respond and others don't.

    The keypad membrane has usually worn through where it gets pressed most. Less commonly, the fault is in the control board behind the keypad.

  • Wine Cooler

    One zone holds steady while the other drifts warmer.

    A fan or sensor in that zone has typically slowed or failed. Each zone has its own parts.

Check this before you call

  1. Have the serial number handy, since it tells us whether the unit is pre- or post-Samsung.
  2. After cleaning, make sure the burner caps sit level and are fully dry.
  3. If you can reach the top or base grille on a built-in fridge without tools, vacuum it.
  4. Check the settings menu to make sure the oven isn't in Sabbath, lock or demo mode.

From our technicians

Working on Dacor equipment

Dacor equipment usually arrived as part of a complete kitchen design: a pro-style range in an Alamo Heights remodel, double wall ovens in a Dominion home, a refrigerator column paneled to match the cabinets. Owners keep these appliances a long time, and many of the units we see predate Samsung's purchase of the brand.

That is why our first question is the serial number. A 2010 Dacor and a 2022 Dacor may look similar on the outside, but their control boards, parts sources and diagnostic steps are not the same.

What sets Dacor apart

Dacor started as an independent California luxury brand, and Samsung has owned it since 2016. Current Dacor ovens, ranges and refrigerators combine Dacor's heavy built-in and pro-style hardware with Samsung-designed controls. That creates a real split in service: older, pre-acquisition Dacors run on their own platform, and some of their proprietary control boards are now hard to find, while newer models share Samsung electronics that are much easier to support. The serial number tells us whether your Dacor is an older or newer one.

The first step on any Dacor is dating it from the serial number, because that decides where the parts come from and whether a control board is still available. The mechanical side is built to be serviced, burners and igniters as well as elements, hinges and seals, and it's usually worth fixing even on an older Bertazzoni. Dacor sits in high-end kitchens, so the pull-out is planned around stone and cabinetry, the gas is shut off before we disconnect, and every fitting gets leak-tested afterward.

Before and after Samsung

Pre-2016 Dacors use the brand's own proprietary electronics. The mechanical parts are generally still serviceable, but some of the original control boards are difficult to find now, and we confirm availability before quoting. On newer units, many electronic parts are shared with Samsung, so getting them is usually quicker.

If an older Dacor's board is no longer available, that does not always end the conversation, but it does change the math. We lay out the options plainly so you can decide.

Ovens that bake wrong and burners that will not stay lit

The most common Dacor oven complaint is not a dead oven but one that reaches temperature on the display while recipes come out wrong. That usually points to a temperature sensor reading slightly off or a calibration that has drifted, and we test actual cavity heat against the display before replacing anything.

When a cooktop burner lights and then drops out, it often has a fouled igniter, or a cap that was set back slightly off after cleaning. Holiday cooking from Thanksgiving to New Year's is when these faults show up most, so book early if you notice one in the fall.

Surges, heat and built-in refrigeration

Touch panels and control boards are the Dacor parts most exposed to the power surges that come with spring storms in San Antonio. If keys stopped responding or the display went dark after a storm, tell us so we can check the supply and the board together.

Built-in Dacor fridge columns and wine units vent through a grille at the top or base. After months of summer heat, a dusty condenser in that grille is the usual reason a column runs warm and its fans sound louder than normal.

Questions

Dacor repair questions

How do I know if my Dacor is pre- or post-Samsung?

Read us the serial number from the rating label and we can tell. It changes which parts fit and how quickly we can get them.

Only some buttons on my Dacor oven work. Is it the board?

Often it is the keypad membrane worn out where you press most, which is a smaller repair. We test the keypad before blaming the control board behind it.

Will you protect my countertops when pulling out a Dacor range?

Yes. The removal is planned around your stone and cabinets; the gas valve gets closed before we disconnect anything, and the connection is leak-tested once it's reinstalled.

Does the age of my Dacor matter?

It does. Some older Dacor parts are proprietary and now difficult to track down. Newer models share many electronics with Samsung, which usually makes them easier to support.

Will you protect my counters when you pull the range out?

Yes. We plan the pull-out around your stone and cabinets, and the gas connection gets shut off and leak-tested before and after.

Dacor acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online