Jump to main content
Frigidaire logo

Frigidaire appliance repair in San Antonio, TX.

Frigidaire runs on the Electrolux platform, and parts are plentiful. The catch is that Gallery, Professional and standard models use different boards, so the full model number matters.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Everyday brands

Frigidaire appliances we repair

What fails most on Frigidaire

  • Dead dispenser from wires broken at the door hinge
  • Iced coil after a defrost failure
  • Drain pump blocked on washers and dishwashers
  • Oven sensor reading off
  • Wrong board ordered for Gallery or Professional models

Error codes

Frigidaire error codes, decoded

What the display is telling you. Code meanings shift by model and year, so the technician verifies on the unit.

  • Frigidaire Gallery
  • Frigidaire Professional
  • Laundry and ranges built on the Electrolux platform

Frigidaire oven

F10
The oven is overheating. Expect either the sensor or one of the control's relays to be at fault.
F11
The touchpad has a shorted key.
F30
The oven sensor is reading open or shorted.
F90
The door lock motor is faulty.

Frigidaire washer

E11
A fill fault. Inspect the faucet, fill hose, inlet valve and screens.
E21
Draining is taking too long. Check the pump, its filter and the hose.
E35
The washer has detected an overfill.
E41
Either the door is not closed or its switch has gone bad.

Frigidaire dishwasher

i10
The dishwasher is not taking in water.
i20
The dishwasher is not pumping water out.
i30
The leak sensor in the base has detected water.

Worth checking before you call

  • • Frigidaire is Electrolux's main brand, and a large share of parts cross between the two.

From our technicians

Working on Frigidaire equipment

Frigidaire appliances fill a lot of San Antonio rentals, starter homes and new builds, from apartments near the Medical Center to subdivisions in Schertz and Cibolo. They are simple, common and well supported with parts, which makes most repairs straightforward.

The one trap is the electronics. Gallery and Professional models can share every pump, valve and fan with a standard Frigidaire and still use a completely different control board. We order by the full model number, never by the brand.

Our Frigidaire work covers microwaves, cooktops, ovens, ranges, dishwashers, dryers, washers, freezers and refrigerators. The technician diagnoses, gives you one price, and starts only once you agree.

What sets Frigidaire apart

Electrolux owns Frigidaire, and because the two share repair methods and parts, those parts stay easy to get well after the warranty runs out. Frigidaire refrigerators are conventional designs, and many side-by-sides route the dispenser wiring through a harness in the door hinge that flexes every time the door opens. Gallery and Professional models use control boards of their own even where the mechanical parts match the standard line. Order a Frigidaire board by brand alone and you will often get the wrong one.

When a Frigidaire side-by-side dispenser goes dead, we test the hinge harness for broken wires before replacing the dispenser parts. Every board we order is matched to the full model number, because Gallery, Professional and standard models differ in their electronics. Frigidaire is regular work for us: we stock its common parts, and if one must be ordered, you hear the wait before we start.

Side-by-side dispensers and the door hinge

A Frigidaire side-by-side whose ice and water dispenser has gone dead often has a perfectly good dispenser. The wires that feed it run through the top door hinge and bend every time the door opens. Years of that and a conductor breaks inside the insulation. We test continuity through the harness before replacing anything.

If the dispenser works but delivers a weak stream, hard water is the next suspect. Scale collects in the water line and the inlet valve, and a new filter by itself will not remove it.

Rentals, move-outs and PCS season

With Joint Base San Antonio nearby, many Frigidaire calls come from landlords and tenants around a move. A range found with a dead element at the walk-through, a washer left holding water, or a fridge left unplugged with its door closed are usually minor repairs. We can meet a property manager or tenant at the address, write up what we found and quote before any work.

Oven and laundry codes

Frigidaire ovens report F10 for running too hot, F30 for a sensor reading open or shorted, F11 for a shorted touchpad key and F90 for the door lock motor. We measure the sensor before deciding on a board. On washers, E21 is a slow drain, often a blocked pump, and E11 is a fill fault, often scaled inlet screens in this area. Dishwashers use i10, i20 and i30 for fill, drain and leak.

Repair or replace on a Frigidaire

Parts are affordable, so a fan, sensor, pump, harness or element is almost always worth fixing. An older refrigerator with a dead sealed system is the main time buying new may win out, and we give you an honest read on it. Have the model and serial ready; on a refrigerator the label is inside on the left wall or near the top.

Questions

Frigidaire repair questions

My Frigidaire oven shows F10. What is it telling me?

The oven is overheating. Expect either the sensor or one of the control's relays to be at fault. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.

My Frigidaire oven shows F11. What is it telling me?

The touchpad has a shorted key. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.

My Frigidaire oven shows F30. What is it telling me?

The oven sensor is reading open or shorted. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.

Will an Electrolux part work in my Frigidaire?

Sometimes. The brands share a platform and many parts, but not all. We confirm with your model number before ordering.

Why does the exact model number matter so much?

Gallery, Professional and standard Frigidaire models can look alike and still use different control boards. The wrong board means a wasted trip.

Can you fix a Frigidaire in a rental I manage?

Yes. We can meet your tenant or property manager at the house, and the person who signs off on the job sees the quote before any of it starts.

Frigidaire acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online