Maytag appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Everyday brands
Maytag appliances we repair
- Maytag refrigerator
- Maytag washer
- Maytag dryer
- Maytag dishwasher
- Maytag oven
- Maytag microwave
- Maytag freezer
- Maytag cooktop
- Maytag range & stove
What fails most on Maytag
- Worn drive belt or coupler on top-loaders
- Lid switch or door lock that stops the spin
- Drain pump jammed with debris
- Refrigerator defrost failures
- Squealing dryer from a worn idler pulley or belt
Error codes
Maytag error codes, decoded
What the display is telling you. Code meanings shift by model and year, so the technician verifies on the unit.
- Bravos and other top-load washers
- Commercial-technology home laundry
- Bottom-freezer refrigerators
- Dishwashers with the Dual Power filter
Maytag washer
- F8E1 / LF
- Slow fill, reported by the shared Whirlpool-family control. Inspect the faucet, inlet screens and valve.
- F9E1 / Ld
- Slow drain. Check the pump and filter, and how far the drain hose goes into the standpipe.
- F5E2
- The front-load door lock is not engaging.
Maytag dryer
- AF
- Restricted airflow somewhere between the lint screen and the end of the vent.
- F22 / F23
- The exhaust thermistor reads open or shorted.
Worth checking before you call
- • Maytag is built by Whirlpool, so nearly all of its codes and parts match the Whirlpool versions.
From our technicians
Working on Maytag equipment
Maytag owners tend to keep their machines. A lot of the washers and dryers we see in San Antonio laundry rooms have run for well over a decade, and the owners would rather fix them than shop for a new pair. Most of the time that is the right call.
The brand has run on Whirlpool engineering ever since Whirlpool acquired Maytag in 2006. That means the same error codes, the same test procedures and a deep parts catalogue shared with Whirlpool, KitchenAid, Amana and Roper.
Our Maytag work covers microwaves, cooktops, ovens, ranges, dishwashers, freezers, refrigerators, dryers and washers. After diagnosing the problem, the technician quotes one price that covers parts and labor, then waits for your approval.
What sets Maytag apart
Maytag has belonged to Whirlpool since 2006, and current Maytags are built on the Whirlpool platform. Under the panels, a Maytag shares parts and repair steps with Whirlpool, KitchenAid, Amana and Roper models. The brand's commercial-technology washers and dryers use heavier components than a typical home machine, including a sturdier drive and tub support, so they stay worth repairing longer. Maytag refrigerators follow the conventional Whirlpool cooling layout, where the defrost system is the most frequent cause of a warm fresh-food section.
We treat a current Maytag the way we treat a Whirlpool: same codes, same parts catalogue, same test order. Maytags from before Whirlpool bought the company tend to be mechanically sturdy, but some parts are out of production, so we verify a part can be found before we recommend fixing one. Belts, couplers, lid switches, pumps and dryer idlers are the parts we see most, and they are usually stocked.
Commercial-technology laundry
Maytag's commercial-technology washers and dryers have stronger tub support and heavier drive parts than ordinary household machines. They still wear, but slowly, and a belt, coupler, switch or pump on one of them is an easy decision to repair. These are the Maytags we most often tell people to keep.
On a Bravos or similar top-loader that fills but will not spin or agitate, the usual suspects are the shifter, the lid switch or the coupler. Slow-drain codes, F9E1 or Ld, are most often a sock in the pump. We test in that order before taking the cabinet apart.
Heat, lint and hard water
Lots of San Antonio Maytag dryers are vented up into the attic and out a roof cap. Those long, hot runs collect lint, the dryer runs longer to finish a load, and the thermal fuse eventually trips. An AF code means the dryer has noticed the restriction. We clean what we can reach, check the cutoff, and tell you if the full run needs a vent cleaning.
SAWS water leaves scale on inlet screens, so washers that used to fill fast start throwing F8E1 or LF. Dishwashers with Dual Power filters still need the filter rinsed, and hard water makes that more important, not less.
Before you call
Find the model and serial label. Top-loaders tend to carry the sticker beneath the lid or on the console's back, dryers carry it inside the door opening, and refrigerators on an interior wall. Let us know any code showing on the display, and whether the machine is dead, noisy, or running without finishing. That lets the technician arrive with the likely parts.
Questions
Maytag repair questions
My Maytag washer shows F8E1 / LF. What is it telling me?
Slow fill, reported by the shared Whirlpool-family control. Inspect the faucet, inlet screens and valve. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.
My Maytag washer shows F9E1 / Ld. What is it telling me?
Slow drain. Check the pump and filter, and how far the drain hose goes into the standpipe. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.
My Maytag washer shows F5E2. What is it telling me?
The front-load door lock is not engaging. The same code can mean something slightly different across models and years, so our tech checks it on your unit before pricing anything.
Are today's Maytag appliances basically Whirlpools?
Mechanically, largely yes. Current Maytag appliances run on Whirlpool's platform and share many parts, though trim, features and the heavier commercial-technology laundry are Maytag's own.
My Maytag dryer squeals when it starts. What is that?
Usually the idler pulley or the drive belt is worn. Both parts are common and inexpensive, and replacing them early keeps the belt from breaking in the middle of a load.
Can you fix a Maytag washer from before 2006?
Often, yes. Those machines are sturdy. Before we give you a quote, we make sure the part is still available, so a repair never stalls halfway.
Do you use genuine Maytag parts?
Genuine or manufacturer-specified parts are our default, and many of them ship under the Whirlpool family name. If we ever suggest an aftermarket part, we tell you first.
Maytag acting up?
Tell us the model and the symptom. A person answers 24/7.