Jump to main content
Sharp logo

Sharp appliance repair in San Antonio, TX.

Microwave drawers, over-the-range microwaves and Sharp refrigerators repaired safely at your home, with a clear word on when a repair is not worth it.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Everyday brands

Sharp appliances we repair

What fails most on Sharp

  • Door interlock switch failure
  • High-voltage diode or capacitor failure
  • Weak magnetron heating unevenly or not at all
  • Microwave drawer motor, rail or sensor faults
  • Worn touch panel or membrane keypad

Sharp, plainly

What usually goes wrong

In American kitchens, Sharp, a long-established Japanese electronics maker, is known mostly for its microwaves. Most likely yours is a Sharp microwave drawer or an over-the-range model, and now and then a Sharp refrigerator.

  • Microwave

    The plate spins and the lamp glows, yet the food comes out cold.

    Often one of the high-voltage components, whether the diode, the capacitor or the magnetron, has failed. A bad door switch can also let everything run except the heat.

  • Microwave

    The drawer stops halfway or will not close by itself.

    Often there is debris on the rails, or someone forced the drawer. If not, the drawer motor or a position sensor may be the part that failed.

  • Microwave

    Some keypad buttons have stopped working.

    Usually the membrane keypad has simply worn out, or years of steam and heat have damaged it. A new panel fixes it.

  • Refrigerator

    Frost is building inside the freezer and cooling is getting weaker.

    Usually defrost has stopped working because a heater, sensor or control has quit. A door left slightly ajar speeds it up.

  • Refrigerator

    A rattle or buzz is coming from the back or the freezer.

    Usually the fan blade is striking ice or the fan motor is wearing out. Sometimes the drain pan underneath has just shifted.

Check this before you call

  1. Reset the microwave's breaker, since a storm surge can leave it unresponsive.
  2. Before you blame the motor, clear crumbs and spills from the drawer track.
  3. Close the fridge door and make sure the gasket seals all the way around.
  4. Make sure the fridge sits level so the doors close by themselves.

From our technicians

Working on Sharp equipment

Sharp microwave drawers are a common sight in San Antonio kitchen islands, especially in newer homes in Stone Oak, Alamo Ranch, Schertz and Cibolo and in remodeled kitchens closer to the center of town. Over-the-range Sharp microwaves are everywhere too, and we also see the occasional Sharp refrigerator.

On the Sharp, our technician pins down the fault before anything else, then gives you one combined parts-and-labor price, and work waits for your okay. Should a Sharp part need ordering, you hear how long it will take, and your second appointment is set before we pack up.

We do not perform manufacturer-warranty work.

What sets Sharp apart

Sharp, a Japanese electronics company, focuses its American kitchen appliances on microwaves, among them over-the-range units and its well-known built-in microwave drawer. A Sharp drawer adds parts a countertop oven never has: a powered drawer on rails, a drive motor and position sensors. Sharp refrigerators, less common here, are conventional designs with electronic defrost and fan-driven airflow. Like every microwave, each Sharp model has a high-voltage capacitor that can keep a dangerous charge after it is unplugged.

On any Sharp microwave our technician discharges the high-voltage capacitor before doing anything inside the case, every time. Next come the door interlock switches, which fail much more often than magnetrons, followed by the diode, capacitor and magnetron. If the drawer won't open or close, we treat it as mechanical until the rails, motor and sensors prove otherwise.

Safety comes before the first screw

A microwave's high-voltage capacitor can keep a lethal charge stored inside long after the cord is pulled. So we ask owners never to open the case, and our technician discharges the capacitor before starting any internal work, not halfway into it.

Resetting the breaker, cleaning the drawer track and checking the outlet are fine for you to try. Anything inside the cabinet is not.

Drawer trouble is often mechanical

A Sharp drawer that stops partway, will not close on its own, or makes a grinding noise is usually not an electrical fault. Crumbs and spills on the rails, a drawer that was forced, or a worn drive gear are common. Beyond that, the drawer motor or one of the position sensors may have failed, and those are replaceable parts.

A Sharp drawer that slides fine yet leaves food cold points us at the high-voltage parts: the magnetron, the capacitor, the diode or a door switch. Door switches are the most frequent culprit, and they are inexpensive.

Storms, heat and the keypad

Spring thunderstorms and the outages that come with them can leave a microwave dead or unresponsive, and a surge can damage the control board. Try resetting the breaker before calling. If the display stays dark or the breaker trips again, it is time for a technician.

Membrane keypads also wear out, especially the buttons used most. Steam from a range below an over-the-range model, plus years of use, speeds that along. Replacing the panel usually restores every button.

When it is worth repairing

A built-in microwave drawer is expensive to replace and fits a cutout sized for it, so most drawer repairs are worth doing. Over-the-range models are usually worth fixing for a door switch, diode or keypad. A basic countertop microwave seldom earns more than a simple repair, and we will say that plainly rather than quote a job that makes no sense.

Questions

Sharp repair questions

My Sharp microwave drawer will not open. Is the motor bad?

Sometimes, but first we check the rails for debris, the child lock setting and the position sensors. A forced or obstructed drawer is a common cause and an easier fix than a motor.

Can I replace the microwave door switch myself?

We do not recommend it. Reaching the switches means opening the case next to the high-voltage capacitor, which can still hold a dangerous charge when unplugged. Leave internal work to a technician.

Is an over-the-range Sharp worth fixing?

Often, yes, for a door switch, diode, fan or keypad. If the magnetron and control board both fail on an older unit, replacing it may be the better choice.

Can I safely fix my own microwave?

Not inside the case. Microwaves hold dangerous voltage even after unplugging. Cleaning and a breaker reset are yours to do; everything else belongs with a technician.

Is a microwave drawer worth repairing?

Usually, especially for mechanical problems. Built-in drawers cost a lot to replace, and the common faults are fixable parts.

Sharp acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online