Jump to main content
Ice Makers · 6 min read

Hill Country Well Water and Your Appliances: Hard Water, Sulfur and Treatment Order

Private wells in Helotes, Bulverde, Boerne and Fair Oaks Ranch draw on the Trinity Aquifer, which can be hard and can smell of sulfur. How that water treats your ice maker, dishwasher and washer, and how treatment equipment is usually lined up.

By TrueHand Appliance Repair

Drive out Bandera Road past Helotes, or up US-281 toward Bulverde, and a lot of the homes you pass have no city water connection. They pump from a private well, and most of those wells draw from the Trinity Aquifer. The same is true of plenty of properties around Boerne, Fair Oaks Ranch and the far northwest corner of Bexar County.

Trinity water varies a lot from one well to the next. Some is perfectly pleasant. Some is very hard. Some carries hydrogen sulfide, the rotten-egg smell that hits you when you run the hot tap. A smaller number of wells also show iron. The only way to know what yours carries is to test it.

Your appliances will tell you something is off before a lab report does. This guide covers what that water does to the ice maker, dishwasher and washer, the order treatment equipment is usually installed in, and where an appliance technician's job ends and a water-treatment professional's begins.

What the water is doing to your machines

Hardness: the scale problem

Hard water carries dissolved calcium and magnesium. Heat it or let it evaporate and those minerals come out as scale. On a well, there is no utility blending or treating the water, so whatever hardness the aquifer delivers comes straight into the house.

  • Ice maker: scale builds on the fill valve's inlet screen and inside the fill tube. Fill volume drops, cubes get small and hollow, and eventually the valve sticks partly open and the fill tube freezes shut.
  • Dishwasher: a white film on glasses, clogged spray-arm holes, scale on the heating element, and a gritty buildup in the filter.
  • Washer: scale on inlet screens slows filling. Hard water also needs more detergent to clean, which tempts people to overdose and leaves residue in front-load gaskets.

Sulfur: the smell, and more

Hydrogen sulfide gives water its rotten-egg smell. It is a nuisance in the kitchen, but it also matters to appliances.

  • Ice made from sulfur water can taste and smell off, even through the refrigerator's filter. That filter was not designed to handle sulfur and loads up quickly.
  • Sulfur water can tarnish silverware in the dishwasher and darken some metal parts over time.
  • If the smell is mainly from the hot water, the water heater may be part of the story, which is a plumber's question, not an appliance one.

Don't confuse this with a dishwasher that smells like sewage. That usually comes from the drain side, and we cover it in a separate guide on dishwasher sewage smells.

Iron: when it is there

Some wells carry iron. It shows up as orange or brown staining in sinks and toilets, rust-colored spots on laundry, and refrigerator filters that turn brown well before their replacement date. Iron can also foul a softener's resin if the softener is not set up for it. If you see those signs, include iron in your water test, but don't assume you have it just because you're on a well.

The usual order for treatment equipment

Treatment systems are designed around your test results, so the exact setup varies. The general logic is to remove the coarse material first and the finest last, so each stage protects the one after it.

  1. Sediment filter. First in line, right after the pressure tank. It catches sand, grit and particles that would otherwise clog everything downstream, including the small inlet screens on every appliance.
  2. Iron or sulfur treatment, if your test calls for it. An oxidizing filter, an air-injection system or a similar unit removes iron and hydrogen sulfide. It usually sits ahead of the softener so the softener isn't fighting iron and sulfur along with hardness.
  3. Water softener. Removes calcium and magnesium. This is the single biggest help for scale in the ice maker, dishwasher and washer.
  4. Point-of-use treatment. A reverse-osmosis system under the sink, or a UV unit if bacteria are a concern, handles drinking and cooking water. Some homeowners run the refrigerator line from the RO system. If you do, make sure the RO output pressure is enough for the refrigerator's inlet valve.
  5. The refrigerator's own filter. Last in line, and best treated as a final polish for taste and odor, not as primary treatment.

A softener that was set up for city water will not be set correctly for a well. If you moved from a SAWS-served home and brought the softener with you, have its settings checked for your new water.

Setting the appliances for treated water

Once a softener is in, a few appliance settings should change.

  • Dishwasher water-hardness setting. Many dishwashers, particularly European brands, have a hardness setting and a rinse-aid or salt dispenser. Set it to match your treated water. The manual explains how.
  • Detergent dose. Softened water needs much less detergent. Overdosing in soft water causes sudsing in washers and etching on glassware.
  • Refrigerator filter schedule. Even with good treatment, change the fridge filter on time. With sulfur or iron in the raw water, check it more often.

Maintenance on a well system

  • Change the sediment cartridge on the schedule the installer sets, or sooner if water pressure drops.
  • Keep the softener stocked with salt, and have the whole system serviced as the manufacturer recommends.
  • Pull and rinse the inlet screens on the washer once a year.
  • Once a month, clean the dishwasher filter and look for scale in the spray-arm holes.
  • If your manual allows it, run the dishwasher through a citric-acid cleaning cycle.
  • Retest the well periodically. Water from a private well can change over time, especially after drought or heavy rain.

Safety notes

  • If the water smells strongly of sulfur, the smell itself is unpleasant, but have the well tested to understand what else may be present. Texas A&M AgriLife Extension and county health resources are good places to start.
  • Don't run an appliance's descaling product through a dishwasher or washer unless the manual says it is safe.
  • Always shut off the water supply and unplug the appliance before removing an inlet hose or screen.

Where a water-treatment pro takes over

An appliance technician fixes the appliance. We can swap a scaled ice-maker fill valve or a washer inlet valve, clean out a dishwasher's spray arms, and let you know when your water is the real cause. Choosing, sizing and installing whole-house treatment is a different trade. A water-treatment specialist tests the well and designs the system. A licensed plumber handles the piping.

If the appliances keep failing in the same way after treatment is in, that's when to call us. Ice-maker fill problems are a common one: see ice maker repair. So are scaled dishwashers: see dishwasher repair. We serve Helotes, Bulverde, Boerne and Fair Oaks Ranch, and you get one combined price for parts and labor from the technician before any work. If the problem is low pressure at the fridge dispenser rather than water quality, our guide on slow dispensers on well systems covers that side.

Keep reading

Call now, 24/7(210) 939-3313Book online