AGA appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Built-in & pro-style
AGA appliances we repair
What fails most on AGA
- Burner or control trouble on gas models
- Element or thermostat failure on electric models
- Heat lost through tired door seals or insulation
- Hours-long reheat after any repair that lets it cool
- Restricted flue or combustion air on fuel-burning models
From our technicians
Working on AGA equipment
There are not many AGA cookers in South Texas, and most of the ones we meet were chosen on purpose: a remodeled kitchen in Alamo Heights, a Hill Country house near Boerne built around a cooker the owners grew up with. Owners tend to know these machines well and notice quickly when the roasting oven starts running cool.
The first thing we need is the fuel type and the model, because a gas AGA, an electric AGA with programmable controls and an older thermostat-and-damper model share a cabinet shape and almost nothing else.
What sets AGA apart
Britain is where AGA builds its cast-iron heat-storage cookers, and Middleby has owned the company since 2015. Instead of a burner or element per oven, an AGA keeps a massive iron core hot around the clock, and every oven and hotplate draws from that stored heat. That design means a cool oven almost always traces to the heat source or to heat leaking out, not to a part inside the oven itself. Gas, oil and electric versions look nearly identical from the front, yet their burners, controls and safety parts are entirely different.
We approach an AGA more like a small boiler than a range. There are only a few controls, but the iron needs many hours to reheat once it has cooled, so these appointments get extra time built in. Burners, elements and thermostats can be serviced, and so can door seals and insulation; to us the cooker is a fixture that should keep going for decades.
How an AGA fails, and why it looks different from a range
Every oven and hotplate on an AGA runs off one stored heat source. A low roasting oven usually comes with a slow boiling plate, because the cause is upstream: a burner that isn't firing properly, a drifting element or thermostat, or heat lost through a worn door seal or insulation that has settled.
Because the iron holds so much heat, the symptoms build gradually over days, and a repair that lets the cooker cool means a long wait before it is back to cooking temperature. We explain that timeline at the start of the visit so dinner plans can be adjusted.
Running an iron cooker through a Texas summer
A cooker that stays hot all day adds real heat to a kitchen that is already fighting 100-degree afternoons, and many San Antonio owners run electric models on reduced settings or programs through the summer. Those programmable controls bring a circuit board into the picture, and boards are sensitive to the surges that come with spring thunderstorms.
On gas models we check the flue and combustion air path along with the burner. On rural properties that cook on propane, we confirm the cooker is set up for that fuel before touching the burner, since a mismatch shows up as poor flame and sooting.
Repair is nearly always the right call
The cast iron itself does not wear out. What wears is the heat source, the thermostat, the door hinges and seals, and the insulation around the core. Replacing an AGA is closer to a construction project than an appliance swap, so the repair-or-replace question rarely comes up.
Some AGA parts are not stocked locally and have to be ordered. If so, the wait gets explained before you approve a thing, and your return trip goes on the schedule before we leave.
Questions
AGA repair questions
Why is my AGA so slow to come back up to heat after a repair?
The core is a large mass of cast iron, and reheating it from cold takes many hours. That is normal behavior, not a sign the repair failed.
Do you work on gas and electric AGAs alike?
Yes, but they are serviced very differently. When you call, give us the fuel type and model so the technician shows up ready for the right burner or element system.
My AGA's ovens are all running cooler than usual. Is one part to blame?
Usually the problem is the shared heat source or heat escaping, since the ovens do not heat independently. We check the burner or element, the thermostat and the door seals together.
AGA acting up?
Tell us the model and the symptom. A person answers 24/7.