La Cornue appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Built-in & pro-style
La Cornue appliances we repair
What fails most on La Cornue
- Gas burner clicking without catching
- Oven thermostat holding below the dial setting
- Heavy oven doors with worn hinges or springs
- Lazy yellow flame from partly blocked ports
- Long waits on parts matched to one specific range
La Cornue, plainly
What usually goes wrong
La Cornue is a French family name in cooking, building ranges by hand for well over a century. If you have one, it is probably the centerpiece range of your kitchen, sometimes joined by a matching cooktop or wall oven.
- Range & Stove
A burner keeps clicking but never lights.
Spills or moisture around the cap and electrode are the most likely cause. A cap that is slightly off center can also stop the spark from reaching the gas.
- Oven
Roasts are running well past the time the recipe calls for.
The thermostat may have drifted and be holding a lower heat than the dial shows. A door that no longer shuts snugly can let heat escape as well.
- Range & Stove
The oven door feels slack or falls open faster than it once did.
The doors are heavy, so the hinges and springs wear after years of use. New hinges bring back the feel without any other work.
- Cooktop
One flame looks yellow and floppy instead of sharp and blue.
Ports partly clogged by boil-overs or cleaner residue are the usual cause. So can a burner head that is not sitting correctly.
Check this before you call
- Raise each burner cap and check that it rests flat and centered on its base.
- If the range has electric ignition, make sure it is plugged in and its breaker is on.
- Clean the oven door gasket and check for torn spots or places where it is pulling loose.
From our technicians
Working on La Cornue equipment
A La Cornue is rarely an impulse purchase. It is usually the centerpiece of a remodeled kitchen, and in San Antonio we tend to find them in the historic homes of King William and Monte Vista, in Alamo Heights and Olmos Park renovations, and in larger Hill Country homes around Boerne and The Dominion.
First the technician diagnoses the range and explains what has worn or failed, then quotes a single price covering parts and labor. Nothing else is done until you approve. Because La Cornue parts often have to come from France, you will hear our best estimate of the wait before deciding, and the return visit gets booked before we leave.
We do not do manufacturer-warranty work for La Cornue. For ranges past their warranty, we are glad to keep them cooking.
What sets La Cornue apart
La Cornue ranges are handmade in France in small batches and often built to order, so two with the same model name may differ in fuel, oven arrangement and hardware. The bodies are heavy cast and enameled metal, the controls are mechanical, and the signature vaulted oven moves heat by its shape instead of relying on a fan. The CornuFe line brings the look to a more standard build. La Cornue ranges are built to be repaired for decades, and the main limit is how long the exact part takes to come from France.
We treat each La Cornue as its own installation and match parts to the identification plate, not just the model name. Burners, valves, thermostats, hinges and seals can all be serviced, and we would sooner tell you a part is weeks out than install one that almost fits. Before you approve a thing, the diagnosis tells you how long the wait should be.
Why the plate matters more than the model name
La Cornue builds in small batches and often to a customer's specification. A Chateau or a CornuFe of the same nominal size may have a different burner set, a different oven configuration or a different gas setup from the one next to it in the catalog. Ordering by model name alone is how the wrong part ends up in the box.
The identification plate, usually behind a lower door or drawer front, carries the details we need. Take a clear photo of it before you call. That one step can shorten the wait considerably, because we can start confirming parts before the visit.
The faults we see most
Cooktop burners account for most calls. When a burner clicks but never lights, the electrode is usually dirty or wet, the cap is off center, or spills have filled the ports. A yellow, soft flame points to blocked ports or a burner head not seated properly. These are often fixed on the first visit.
Ovens tend to drift as thermostats age, so roasts take longer than the recipe says. The heavy cast doors wear out their hinges and springs too, and a door that drops open or fails to seal lets the heat out. New hinges restore the feel and the seal without touching anything else on the range.
Propane, gas supply and San Antonio kitchens
Most ranges inside the city run on natural gas from CPS Energy. Out toward Bulverde, Boerne and the far northwest, many homes cook on propane, and a range that was converted needs the right orifices. Tell us your fuel when you call. If a flame problem traces back to the supply or regulator and not the range, we shut it off and explain what we found.
Spring storms that knock out power can also leave electric ignition or oven lights acting strangely afterward. Before we suspect the burners, we test the outlet, the breaker and the ignition module.
Repair is almost always the right answer
A La Cornue is built to be kept going, and nearly every wearing part is replaceable. The real trade-off is time, not whether it can be fixed. When a fault is confined to one burner or the oven and there is no smell of gas, you can often keep using the rest of the range while the part is on its way. During the visit, we let you know what is still safe to use.
Questions
La Cornue repair questions
How long does a La Cornue part usually take?
It depends on the part and whether it has to be confirmed against your range's build. Common items can be quicker; parts specific to your configuration can take several weeks. We give you a realistic estimate at the diagnosis instead of a hopeful one.
Can you work on a La Cornue that was converted to propane?
Yes. Mention it at booking so the technician comes prepared, and we will confirm the burners and oven are set up for the fuel your home really uses.
Do you service CornuFe ranges as well as the hand-built models?
Yes. CornuFe ranges are a more standardized build, so parts are often simpler to confirm, but we still match them to the identification plate before ordering.
Why do La Cornue parts take so long?
They ship from France and are often matched to how your range was built. Verifying it takes a while, but it guarantees the part is the right fit. We give you a realistic wait as soon as we know what is needed.
Can I still cook on the range while a part is coming?
Often you can, as long as the problem is confined to one burner or the oven and you smell no gas. At the visit, we let you know what you can safely keep using.
La Cornue acting up?
Tell us the model and the symptom. A person answers 24/7.