Bertazzoni appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Built-in & pro-style
Bertazzoni appliances we repair
- Bertazzoni refrigerator
- Bertazzoni dishwasher
- Bertazzoni oven
- Bertazzoni cooktop
- Bertazzoni range & stove
What fails most on Bertazzoni
- Igniter, electrode or spark module faults
- Thermocouple letting a burner go out when the knob is released
- Bake, broil or convection element failure on dual-fuel ovens
- Worn oven door hinges or gasket
- Waits on less common parts shipped from Italy
Bertazzoni, plainly
What usually goes wrong
Bertazzoni is an Italian family manufacturer with generations of cooking equipment behind it. Most likely yours is a range or gas cooktop, and some kitchens add a matching built-in fridge or dishwasher.
- Cooktop
A burner keeps clicking but never catches.
Usually the cap sits a little off center, or a spill has left the igniter tip wet or dirty. The spark module is the less common culprit.
- Range & Stove
The burners light normally, but the oven never gets beyond lukewarm.
Dual-fuel ranges have an electric oven, so the fault is usually an element or the temperature sensor. The gas side isn't involved.
- Oven
The bottoms of dishes scorch while the tops stay pale.
A failed upper or convection element is often leaving all the work to the bottom one. On convection models the fan can be the cause too.
- Dishwasher
The door slams down when you open it, or it won't hold its position.
A heavy custom panel wears out the door springs or cables on built-in dishwashers. It is a fairly simple repair.
- Refrigerator
The built-in fridge started running warm after a stretch of 100-degree days.
Usually the condenser is coated in dust and can't shed heat in its tight cabinet opening.
Check this before you call
- Lift off each burner cap, then reseat it so it lies flat and centered.
- After a boil-over, dry the burner and igniter completely before trying again.
- If only the oven is dead, check its breaker, since the gas burners can run without it.
- Clean the oven door gasket and check it for torn or flattened spots.
Error codes
Servicing Bertazzoni equipment
Bertazzoni makes pro-style ranges in Italy. Our work on them mostly falls into three groups: igniters and spark modules; thermocouples, when a burner dies the instant you let go of the knob; and, in the convection oven, its elements and fan.
- Professional Series
- Master Series
- Heritage Series
- Dual-fuel and induction ranges
Worth checking before you call
- • When a burner dies the moment you release the knob, the thermocouple is probably failing or sitting out of the flame.
From our technicians
Working on Bertazzoni equipment
Bertazzonis tend to anchor kitchens someone planned with care, whether it's a colorful range in a Monte Vista bungalow after a remodel, a pro-style dual-fuel model in a Stone Oak home, or a gas rangetop built into an island. The burners and knobs are simple and solid, which makes them pleasant to service.
What takes planning is the parts. Common wear items are usually reachable, but less common ones come from Italy. We tell you the expected wait during the diagnosis, before any order is placed.
What sets Bertazzoni apart
Bertazzoni is an Italian family company that builds its ranges and cooktops in its own factory in Guastalla, using its own burner and oven designs. On the cooking side it's traditional and mechanical: brass burners and cast-iron grates, plus dual-fuel models where the gas burners sit above an electric convection oven. The line also includes panel-ready built-in refrigerators and dishwashers meant to sit flush with the cabinetry. Parts support runs through a smaller network than the big brands, and less common parts ship from Italy.
A dual-fuel Bertazzoni gets tested as two systems, gas cooktop and electric oven, since an oven that won't heat tells us nothing about the burners, and the same goes the other way. Igniters, spark modules, thermocouples, elements and convection fans make up most of the work. We close the gas supply before moving the range and leak-test every fitting before you cook again, and we confirm lead times on anything that has to come from Italy before you commit.
Two systems in one dual-fuel range
On a dual-fuel Bertazzoni, gas feeds the cooktop and electricity runs the oven, which has separate elements plus its own temperature sensor and convection fan. If the burners light and the oven stays lukewarm, the gas side is not involved at all. The oven is on its own circuit, so a tripped breaker can kill it while the burners keep working.
The oven inside is a conventional fan-and-element design. If it won't hold temperature, we test the sensor, every element and the door gasket, and on a convection model we also confirm the fan is actually moving air.
Ignition and flame faults we see most
Constant clicking with no flame usually means the burner cap is off center or a boil-over left the igniter tip wet or greasy. If cleaning and reseating do not fix it, the spark module is next. Lights fine but goes out when the knob is let go? That burner's thermocouple is probably failing, or it has shifted out of the flame.
In homes running on propane in the Hill Country, the range must be set up for that fuel. Lazy, yellow or lifting flames after a fuel change are a setup issue, and we check orifices before blaming a valve.
Built-in Bertazzoni refrigeration in a hot climate
Panel-ready Bertazzoni fridges sit flush in a cabinet opening, so their condenser depends on clean air moving through a grille. After a long San Antonio summer, a dusty condenser in a tight opening is the most common reason one runs warm, and it is worth checking before anything else.
Spring storms and summer surges are hard on any control board. If a fridge or dishwasher stopped working after a storm, mention that on the phone, and we'll check the supply and the board on the same visit.
Questions
Bertazzoni repair questions
The oven on my Bertazzoni quit but the burners work. Can I keep cooking on top?
Usually yes, since the two systems are separate on dual-fuel models. If you ever smell gas, stop, shut off the supply and call your gas utility before calling us.
How long do Bertazzoni parts take to arrive?
Common wear parts are often available fairly quickly. Rarer parts ship from Italy and sometimes take longer; you hear the expected wait first, and the order only goes in once you approve.
My burner goes out as soon as I release the knob. What does that mean?
The thermocouple for that burner is most likely failing or not positioned in the flame. It is a common, contained repair.
What do I need ready when I call about my Bertazzoni?
Model and serial number, which fuel it uses (gas, dual-fuel, induction), and where the trouble is: cooktop, oven, or both.
Can you actually get parts for an Italian range?
Common wear parts are usually within reach. Rarer parts ship from Italy and may take some time, and you'll know the expected wait before we order.
Can I still use the burners safely if the oven has failed?
Usually, since dual-fuel models run the two systems separately. Smell gas at any point? Stop right there, shut the gas supply off, and phone your gas utility before anything else.
Bertazzoni acting up?
Tell us the model and the symptom. A person answers 24/7.