Blomberg appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Premium
Blomberg appliances we repair
- Blomberg refrigerator
- Blomberg washer
- Blomberg dryer
- Blomberg dishwasher
- Blomberg oven
- Blomberg microwave
- Blomberg freezer
- Blomberg cooktop
- Blomberg range & stove
What fails most on Blomberg
- Heat-pump condenser or filters packed with lint
- Water tank, drain hose or pump faults on ventless dryers
- Washer drain pump or filter clogged
- Door lock or interlock worn out
- Tight closet installs limiting access
Error codes
Servicing Blomberg equipment
Blomberg is a European line of compact appliances built by Arçelik. In San Antonio we see it mostly in condos, townhomes and laundry closets with no room for anything wider than 24 inches, usually as stacked compact laundry or a ventless heat-pump dryer. The usual repairs are a washer that will not drain, a worn door lock, a heating fault, or a dryer condenser clogged with lint.
- Compact 24-inch washers and dryers
- Ventless heat-pump dryers
- Dishwashers
- Bottom-freezer refrigerators
- Ranges and cooktops
Worth checking before you call
- • A ventless dryer that's running long needs both lint filters cleaned; after that, empty its water tank, or confirm water flows freely out the drain hose.
From our technicians
Working on Blomberg equipment
A Blomberg in San Antonio is usually solving a space problem: a stacked pair in a downtown or Pearl condo, a laundry closet in a townhome near the Medical Center, or a compact dishwasher in a narrow galley kitchen. Plenty of owners picked the ventless dryer because running a duct outside just wasn't practical.
Those choices shape the repair. A heat-pump dryer has no vent to clean, but a stacked pair must be pulled out of its tight space before work can begin, and its parts are specific to the platform.
What sets Blomberg apart
Arçelik, the Turkish manufacturer behind Beko, also makes Blomberg. In North America the brand centers on compact 24-inch appliances: washers, dryers, dishwashers and counter-depth or compact refrigerators. Its signature product is a ventless heat-pump dryer that needs no outside duct, because it strips the moisture from the air and sends the water down a drain. That design means a slow Blomberg dryer fails at its lint filters, condenser, water path or drain pump, not at a vent or a heating element.
Blomberg machines are usually chosen because a full-size, vented pair would not fit. When one dries slowly, we start with the filters, the condenser and the water drain rather than ductwork. These compact machines tend to sit in tight closets, which makes pulling out, reconnecting and leveling a real part of the work; parts availability gets checked while we diagnose.
When a ventless dryer starts taking forever
A Blomberg heat-pump dryer moves warm air in a closed loop, condenses the moisture and either stores the water in a tank or pumps it to a drain. Slow drying almost always starts with lint: the main filter, the second filter in front of the condenser, and the condenser fins themselves. After that we check the water path and the drain pump.
These dryers are meant to run cooler than vented models, so clothes coming out warm rather than hot when the cycle ends is normal. A dryer that leaves the load wet after a long cycle is the one that needs attention.
Hard water on a compact washer and dishwasher
SAWS water leaves limestone behind; on a Blomberg washer or dishwasher it collects at the inlet screens and valves, causing slow fills or fill error codes. Scale also builds on dishwasher spray arms and leaves film on glassware. If you have a softener, set the dishwasher's hardness level to match and reduce detergent.
The washer's drain pump filter is where coins, hair ties and lint end up. A Blomberg washer that stops with the door locked and water still in the drum most often has a clogged filter.
Getting into a closet install
A stacked compact pair in a closet takes care to remove. We plan for unstacking, protecting the flooring and doorframe, and reconnecting the water, drain and power properly afterward. A machine left even slightly out of level will vibrate and may stop during spin.
When you call, tell us whether the machines are stacked and how wide the closet opening is. Keep the model number handy; on compact laundry it's usually on the door rim or on the back.
Questions
Blomberg repair questions
Does a Blomberg heat-pump dryer need a vent cleaning?
No. It has no outside vent. Its lint filters and condenser do the job a vent would, and those need regular cleaning instead.
Where does the water go in a ventless Blomberg dryer?
Either into a removable tank or out through a drain hose, depending on the installation. A full tank or a blocked hose will stop the dryer or leave clothes wet.
Why does my Blomberg washer stop with water still in it?
Usually the drain pump filter is clogged or the drain hose is kinked. The door stays locked until the water is out, which is a safety feature, not a separate fault.
Blomberg acting up?
Tell us the model and the symptom. A person answers 24/7.