Jump to main content
ASKO logo

ASKO appliance repair in San Antonio, TX.

ASKO machines are built heavy, so worn pumps, valves and bearings are usually worth replacing, and scale is the local enemy.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Premium

ASKO appliances we repair

What fails most on ASKO

  • Condensation drying mistaken for a failed dryer
  • Drain pump or filter clogged with debris
  • Door lock or interlock worn out
  • Inlet valve restricted by scale
  • Drum bearings or suspension worn during spin

ASKO, plainly

What usually goes wrong

ASKO is a Swedish-born brand now in the Gorenje group under Hisense. In San Antonio homes it's usually a stainless-tub dishwasher, or a washer and dryer that are compact but heavy-built.

  • Dishwasher

    When the cycle finishes, there's still water standing in the bottom of the tub.

    The filter assembly is most likely packed with food, or a seed or shard of glass has jammed the drain pump.

  • Dishwasher

    Plastics come out wet, and you think the drying system may have failed.

    On a condensation-dry machine that is usually normal. Keeping rinse aid filled and opening the door when the cycle ends both help a lot.

  • Washer

    The cycle is over but the door stays locked.

    Water left in the drum usually keeps the lock engaged. The usual fix is clearing a blocked drain path or replacing a worn lock assembly.

  • Washer

    There is a rumbling or growling during spin that gets a little louder every month.

    That sound usually means the drum bearings are wearing. On a machine this sturdy, replacing them often pays off.

  • Dryer

    Drying takes much longer than it used to and the cabinet runs hot.

    Lint in the filters or the airflow path is the common cause. On condenser models, a dirty condenser is next on the list.

Check this before you call

  1. Twist the dishwasher's bottom filter out and rinse it under the faucet.
  2. Top up the rinse aid before deciding the dishwasher has stopped drying.
  3. Behind the washer, make sure both the hot and cold valves are turned fully open.
  4. Clean each of the dryer's lint filters, and on models with a second filter in the door, clean that one too.

From our technicians

Working on ASKO equipment

ASKO owners usually picked the brand on purpose: a quiet stainless dishwasher in a remodeled kitchen, or a compact, solidly built washer and dryer stacked in a closet. These machines are designed to keep running for a long time, which means a fault is normally one part wearing out, not the start of a decline.

In San Antonio, the part that wears out first is often on the water side. SAWS water is hard, and the limestone it carries settles in inlet valves, filters and spray arms long before anything mechanical gives up.

What sets ASKO apart

ASKO began in Sweden and today belongs to the Gorenje group, which Hisense owns, and it builds in Slovenia. Its dishwashers and laundry borrow ideas from commercial machines: stainless tubs and drums, heavy suspension and frames meant to take more cycles than a typical household unit. Instead of an exposed heating element, ASKO dishwashers use condensation to dry. The parts come through a specialist supply channel instead of the general parts houses, which shapes how a repair gets scheduled.

Damp plastics and cool dishes when an ASKO cycle ends are by design, and we'd rather explain that over the phone than send a technician out to find nothing wrong. For real faults we check part availability during the diagnosis, since ASKO components are not stocked everywhere. Because the machines are built heavy, replacing worn pumps, valves, seals and bearings is usually money well spent.

Hard water and an ASKO dishwasher

Scale on an ASKO dishwasher shows up as cloudy glassware, spray arm holes that slowly close, and an inlet valve that takes longer and longer to fill. Before we condemn a pump or heater, we look at the inlet screen and the spray arms, because restricted water flow can look like a dozen other faults.

If your home has a softener, the dishwasher's hardness setting and detergent dose should match the softened water, not the hard supply. Overdosing in soft water leaves film and suds, and that call is usually solved with a settings change rather than a part.

Laundry that drains, locks and spins on a heavy frame

ASKO washers have a stainless drum on strong suspension; the usual faults are socks or coins blocking the drain path, a door lock that stays shut while water remains in the drum, and bearings that growl for months before they give out. Because the frame is built to last, bearing work often makes sense here when it would not on a lighter machine.

Many ASKO laundry pairs sit in tight closets or off a garage. We plan for pulling the machine out of its space and leveling it again afterward, since a machine left out of level will stop mid-spin to protect itself.

Getting ASKO parts without leaving you guessing

ASKO components come through a specialist supplier, not every general parts counter. During the diagnosis we check availability and the likely wait, so you have the full picture when you decide instead of hearing about a delay after you've already said yes.

When we need to order a part, the technician sets up the return trip before leaving, and the parts-and-labor price you were quoted holds on that second visit.

Questions

ASKO repair questions

My ASKO dishwasher leaves plastics wet. Should I book a repair?

Probably not yet. Condensation drying leaves plastics damp by design. Keep the rinse aid topped up and open the door a crack once the cycle ends. If glass and metal come out wet too, call us.

Does a water softener change how I should run my ASKO?

Yes. Set the dishwasher's water hardness to match the softened supply and use less detergent. The wrong setting can leave film or excess suds.

Why won't my ASKO washer door open after the cycle?

Usually water is still in the drum because the drain is blocked, and the lock stays engaged for safety. Clearing the drain path often frees it. A worn lock is the other likely cause.

Are ASKO bearings worth replacing?

On these heavier machines, frequently yes. If the drum, tub and suspension are sound, a bearing job can add years of service.

My ASKO dishwasher is never hot when the cycle ends. Is something broken?

Most likely not. Condensation drying is meant to leave plastics damp and dishes cooler. If glasses and steel come out clean and dry, it is working.

Are ASKO parts difficult to get?

They need more planning than mainstream brands because they come through a specialist supplier. We look into parts availability while diagnosing, so the wait is known before you make a decision.

ASKO acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online