Turbo Air appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Light commercial
Turbo Air appliances we repair
What fails most on Turbo Air
- Cold cabinet below, but the pan rail up top runs warm
- Condenser clogged despite the self-cleaning brush
- Door or lid gaskets no longer sealing
- Evaporator fan motor failure
- Blocked drain line in the cabinet base
Turbo Air, plainly
What usually goes wrong
Turbo Air is a high-volume maker of commercial cold storage, from reach-ins and prep tables to worktops and units that fit under a counter. It might be in a cafe or small shop, or giving a large household extra cold storage out in the garage or a back room.
- Refrigerator
The prep table's top pans are warming while the cabinet below stays cold.
Lids left open for long stretches and pans piled above the rail are the common reasons. The cooling system itself is often fine.
- Freezer
The freezer is slowly falling behind, with heavy frost building on its walls.
Once the gasket stops sealing, humid air leaks in all day long. Now and then the defrost cycle is not working the way it should.
- Refrigerator
There is often a small puddle on the cabinet floor.
The condensate drain line has usually clogged with debris or slime. Clearing and cleaning it stops the puddles.
- Refrigerator
The cabinet is drifting warmer and the inside fan no longer makes a sound.
Most often the evaporator fan motor is wearing out, and sometimes ice has formed around its blade first. It is a routine replacement.
- Freezer
The door no longer swings shut by itself.
Usually a hinge has worn or the cabinet has moved out of level. Fixing the door often fixes the frost as well.
Check this before you call
- When you can, leave prep table lids shut, and keep pans no higher than the rail.
- Check the gaskets on each door and lid for tears, then wipe them clean so they seal firmly.
- Clear grease and dust off the front intake grille, and do it even when the condenser is the self-cleaning kind.
- Level the cabinet so the doors swing shut and seal without help.
Commercial equipment
Servicing Turbo Air equipment
Turbo Air makes refrigeration for restaurants and food service. Our most frequent jobs are condenser cleaning, failed evaporator or condenser fan motors, worn door seals, defrost trouble and the electronic controller.
- Reach-in refrigerators and freezers
- Prep tables
- Under-counter units
- Glass-door merchandisers
- Open display cases
Worth checking before you call
- • Cabinet warm and the compressor never shuts off? Start by cleaning the condenser coil, since that is where the trouble usually begins.
From our technicians
Working on Turbo Air equipment
Turbo Air equipment is common in the kinds of kitchens San Antonio has a lot of: taquerias and breakfast spots, pizza and sandwich shops, coffee bars, church kitchens and office cafeterias. Some households also run a Turbo Air reach-in in the garage or a back room as extra cold storage.
Nothing begins until you say yes: the technician diagnoses the Turbo Air unit first and quotes a single price covering parts and labor. If the fix needs a Turbo Air part we do not carry, you hear the wait up front and the return trip is booked on the spot. Where your kitchen allows, the visit is timed around the hours you serve.
We do not claim health-code certification and do not perform manufacturer-warranty work.
What sets Turbo Air apart
Turbo Air builds commercial refrigeration in high volume, from reach-ins and prep tables for sandwiches or pizza to worktops, under-counter units, glass-door merchandisers and open display cases. On Turbo Air prep tables the top pan rail is cooled apart from the cabinet underneath, so a warm rail above a cold cabinet usually points to airflow or how the table is used, not a failed system. A lot of Turbo Air units come with a condenser that cleans itself using a rotating brush, which slows dust buildup, but you still need to clean it. Condensing units, controllers, fans and door parts are shared widely across the line.
A prep table lives under a busy line, takes in grease and steam, and has its lids up all shift, so rail airflow, the lids and the condenser get checked before we open anything. Self-cleaning condensers still get inspected, because grease defeats the brush. Where your kitchen allows, Turbo Air visits are timed around service hours, and the work is written up for you afterward.
Warm rail, cold cabinet
This is the classic Turbo Air prep-table call. The pans on top warm up during a rush while the cabinet below holds temperature. Because the rail and cabinet are cooled separately, that pattern usually means the system is working and something is disrupting the rail. Usually the lids have been left up too long, pans are piled past the rail, or something blocks the air path along the rail.
We check those first, along with the rail's fan and the lid gaskets. If the rail still cannot hold with lids down and pans loaded correctly, we move on to the fan, controller and refrigeration.
Grease, heat and the self-cleaning condenser
The self-cleaning condenser on many Turbo Air units uses a brush that sweeps the coil as the unit runs. It slows dust buildup, but grease from a fryer or flat-top sticks to the fins and the brush, and a greasy coil can shorten a compressor's life. A kitchen in a San Antonio summer, with the back door open and the room hot, makes the condenser's job harder still.
We inspect and clean the condenser even on self-cleaning models, check the condenser fan, and look at how much clearance the unit has. That one visit item prevents a lot of mid-summer failures.
Gaskets, fans and drains
Doors and lids open hundreds of times a shift. Gaskets tear, hinges wear, and a cabinet that sits off level stops letting doors swing closed on their own. You end up with frost on the walls and a cabinet that gradually falls behind. Another routine part is the evaporator fan motor, sometimes after ice has formed around its blade.
Small puddles on the cabinet floor usually come from a clogged condensate drain line. Once it is cleared and kept clean, the puddles stop.
Before you call
Give us the model and serial off the label inside the cabinet, tell us whether the rail, the cabinet or both run warm, and let us know your slowest hours. Note any message on the controller before power-cycling the unit.
Questions
Turbo Air repair questions
Our Turbo Air prep rail gets warm during lunch. Is it broken?
Often not. Warm air rushes in through open lids and overfilled pans faster than the rail can keep up. Closing lids between uses and keeping pans at or below the rail helps a lot. If it still will not hold, we test the rail fan and system.
Does a self-cleaning condenser still need cleaning?
Yes, less often. The brush slows buildup but does not stop grease. A periodic inspection keeps the feature working and protects the compressor.
Can you service a Turbo Air reach-in at a home?
Yes. We service it the same way we would in a restaurant. Garage installations work harder in summer, so we also check clearance and the coil.
My unit has a self-cleaning condenser. Does it still need cleaning?
Yes, just less often. It slows the buildup of grease and dust, but it cannot prevent it. A quick check now and then keeps it working as designed.
How come the prep rail loses its cold during a rush?
With lids up and pans overfilled, warm room air gets in faster than the rail can pull the heat out. It helps a lot to shut the lids between orders and keep the pans at sensible levels.
Turbo Air acting up?
Tell us the model and the symptom. A person answers 24/7.