Ice-O-Matic appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Light commercial
Ice-O-Matic appliances we repair
What fails most on Ice-O-Matic
- Bin level control stopping a head that works fine
- Scale on the evaporator cutting output
- Air-cooled condenser clogged with dust or grease
- Water inlet or float valve not filling the sump
- Ice sticking to the evaporator at harvest
Commercial equipment
Servicing Ice-O-Matic equipment
Ice-O-Matic makes ice equipment for restaurants, bars and offices. Our calls are usually about ice output that has slowed or stopped, cubes that hang on the plate at harvest, water pumps, float switches and scale. Hard water from the Edwards Aquifer, and private wells in the Hill Country, build scale quickly, so descaling and the water filter get checked first.
- CIM and ICE series cube machines
- Nugget and flake ice machines
- Under-counter ice machines
- Ice dispensers
Worth checking before you call
- • Replace the filter cartridge if it is past due. Next, describe the ice, whether thin, cloudy or missing entirely, because that steers us to the cause.
From our technicians
Working on Ice-O-Matic equipment
Ice-O-Matic machines turn up in the places San Antonio runs on ice: taquerias and restaurant kitchens, bars along the River Walk and the Pearl, office break rooms, church fellowship halls, and the occasional outdoor kitchen or home bar. We service them as light-commercial equipment, at your address, during hours that suit your business where we can arrange it.
Nothing gets replaced until the technician diagnoses the Ice-O-Matic, and the price you get covers parts and labor together. Work starts only after you approve it. Should an Ice-O-Matic part need ordering, you hear the wait up front, and the return trip is on the calendar before we leave. Before we go, you receive a written record of the findings and the work.
We do not hold any health-code certification and do not perform manufacturer-warranty work. What we do is get the machine making clean, full-size ice again and tell you what kept it from doing so.
What sets Ice-O-Matic apart
Food service, bars, hotels and offices are where Ice-O-Matic commercial ice machines go to work. Most Ice-O-Matic cubers are modular, with the ice-making head mounted on its own bin or dispenser, and that head may be air-cooled or water-cooled, or it may run to a remote condenser. The line also includes self-contained under-counter machines and nugget and flake models. Because the head and the bin are separate pieces, a no-ice complaint can come from either one.
On an Ice-O-Matic we measure before we replace. We confirm whether the bin control is shutting the head off, check how much ice the machine is actually making, and look at the water circuit and condenser, because scale and dirty coils cut output long before a component fails. If a descale and sanitize is what actually fixes it, we tell you, and the work is written down for you.
Head, bin or water: finding which part quit
An Ice-O-Matic cuber is really two pieces of equipment. The head freezes and harvests ice; the bin or dispenser stores it. When the bin looks low, the first question is whether the head stopped making ice or whether the bin control told it to stop. A bin thermostat or level sensor that reads wrong will shut down a perfectly good head.
Next comes the cooling type. Air-cooled heads need clean intake air. Water-cooled heads depend on a water regulating valve and a clean condenser circuit. With a remote condenser, the coil sits on the roof or an outside wall and refrigerant lines run in to the head, so a heat problem may be outside the building. Telling us which type you have, if you know, helps us bring the right parts.
Edwards Aquifer water and scale
San Antonio's tap water comes largely from the Edwards Aquifer, a limestone formation, and it is hard. Inside an ice machine, hard water shows up as white scale on the evaporator plate, on the distributor, and on the float or the inlet valve. Output falls slowly, cubes get thinner or cloudy, and harvest takes longer until the ice starts hanging on the plate. Machines on Hill Country wells can see even more scale, and sometimes staining.
The first step is usually a descale and sanitize done to Ice-O-Matic's procedure, followed by a look at the water filter. If the machine has no filtration, or the cartridge is long overdue, we will tell you. That costs far less than a harvest valve or an evaporator, and it is the most common fix we make on these machines.
Summer heat and air-cooled heads
An air-cooled head in a hot back kitchen or a storage room without much air conditioning works hard from June through September. Add grease or flour dust on the condenser fins and the machine can lose a good share of its output on the days you need ice most. We clean the condenser, check that the machine has the clearance it needs, and look at room temperature before blaming refrigeration parts.
Spring thunderstorms and power blips can also leave a control in a fault state. A machine that went quiet after a storm sometimes needs only a reset and a check of the control and fuses.
When repair makes sense
Ice-O-Matic heads are built to be serviced, and most failures, from water pumps to inlet valves to harvest components, are worth fixing. The decision gets harder when an older head has a compressor or sealed-system leak. If so, you get the repair price plus our honest opinion on whether a new head is the smarter buy.
Questions
Ice-O-Matic repair questions
How often should we have our Ice-O-Matic cleaned on San Antonio water?
More often than the minimum many people assume. With hard city water, scale builds quickly on a busy machine, and a machine that has started making thin or cloudy cubes is already due. We can suggest a cleaning interval based on what we see on your evaporator.
The bin is low but the machine seems to be running. What should we check?
Look at whether ice is dropping into the bin at all, and whether water is in the sump. If the head is making ice slowly, scale or a dirty condenser is likely. If it is not harvesting, or the bin control has shut it down, that is a different repair. Telling us which you see helps.
Do you work on remote-condenser Ice-O-Matic setups?
Yes. Let us know when you call where the condenser sits, such as the roof or an exterior wall, and how we get to it, so the technician arrives ready to check both ends.
Ice-O-Matic acting up?
Tell us the model and the symptom. A person answers 24/7.