Jump to main content
Manitowoc logo

Manitowoc appliance repair in San Antonio, TX.

Indigo NXT cubers, under-counter units and remote-condenser setups repaired on site for light-commercial customers around San Antonio.

Phones staffed 24/7Three-hour arrival window90-day parts warranty

Diagnosis
The failed part is found before any price
Approval
No work begins without your okay
Hours
Calls answered day and night
Warranty
Parts 90 days · labor 30 days

Book online

Send the basics. A dispatcher calls you back.

  1. 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
  2. 2Pick up when we callWe confirm the address and set a three-hour arrival window.
  3. 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.

Would rather explain it out loud? Call us any hour, any day.

Schedule a repair

Step 1 of 2 · Appliance and area

Step 1 of 2

Appliance and area

Which appliance?

Appliance

Where in the San Antonio area?

Booking costs nothing, and we never ask for a card.

Prefer to call? (210) 939-3313

Light commercial

Manitowoc appliances we repair

What fails most on Manitowoc

  • Full-bin signal mistaken for a production failure
  • Scale on the evaporator and water distribution
  • Remote condenser problems away from the head
  • Harvest faults leaving ice bridged on the plate
  • Water inlet or dump valve faults

Commercial equipment

Servicing Manitowoc equipment

A Manitowoc reports its own faults through its lights or display. Most Manitowoc calls involve scale, water pumps, freeze-ups, harvest trouble or low output. With hard San Antonio water, a proper descale and sanitize clears more Manitowoc problems than a replacement part does.

  • Indigo NXT cube machines
  • Under-counter ice machines
  • Flake and nugget ice machines
  • Ice and beverage dispensers

Worth checking before you call

  • • Note exactly what the display or lights show before calling or resetting. It tells us which parts to bring.

From our technicians

Working on Manitowoc equipment

A Manitowoc that stops making ice on a Friday afternoon is a real problem for a restaurant or bar, and a nuisance for an office or a church kitchen before a big event. We service these machines on site across San Antonio as light-commercial equipment, plus the occasional unit in an outdoor kitchen or large home bar.

The technician diagnoses the machine before quoting, and the quote is one price for parts and labor. Nothing starts until you approve it. If your Manitowoc needs a part we do not carry, you get a time estimate, and the return trip goes on the books before we leave. Where we can, the visit fits your service hours, and you get a written note on the work.

We do not carry health-code certification and do not do manufacturer-warranty work.

What sets Manitowoc apart

Manitowoc builds modular commercial ice machines, with the ice head mounted on a separate storage bin and cooled by air, water or a remote condenser. A Manitowoc board uses its indicator lights or display messages to separate three things: a water problem, a harvest problem, or simply a bin that is full. The Indigo NXT cubers carry that diagnostics further with a full display. Manitowoc also makes under-counter machines, flake and nugget models and ice and beverage dispensers, and regular cleaning is written into how all of them are meant to run.

We read what the Manitowoc control is telling us before opening any panels, because the display or lights usually narrow the fault to water, harvest, bin or refrigeration. We confirm your cooling setup when you book, since a remote condenser on the roof changes the visit. When scale or an overdue cleaning is behind a repeat fault, you hear that plainly.

Let the control talk first

Manitowoc machines are good at reporting their own trouble. Depending on the model, the Manitowoc control flashes lights or shows a message pointing to an overlong freeze or harvest, a water problem, or a full bin. Before you power-cycle the Manitowoc, write down exactly what the display says; that one step helps us more than anything else.

A common false alarm is the bin. If the bin switch or sensor thinks the bin is full, the head simply waits. That looks like a dead ice machine from across the room, and it is a different and usually simpler repair than a refrigeration fault.

Hard water is the main enemy here

Edwards Aquifer water is hard, and a Manitowoc cuber pushes a lot of it across the evaporator every day. Scale collects on the plate and the water distribution tube, and the signs arrive in sequence: smaller cubes, longer freezes, slower harvests, and finally a machine that halts on a long-harvest fault with ice bridged over the plate.

A proper descale and sanitize to Manitowoc's procedure fixes more of these machines than any part does. We also check the water filter, and if there is no filtration on the line, we will mention it. On Hill Country wells the scale can come on faster still.

Remote condensers and summer

In many Manitowoc setups the condenser sits on the roof or an outside wall, and refrigerant lines run indoors to the head. In a San Antonio summer that condenser sits in full sun at well over 100 degrees, collecting cottonwood fluff, dust and leaves. When output drops in July, the cause is often up there and not at the machine.

Tell us your setup when you book: air-cooled, water-cooled or remote, and how the technician gets to the condenser. Roof access or a locked mechanical yard changes the time we need. Storm-related power surges can also take out controls or fans, and we check those when a machine quits right after a spring thunderstorm.

Questions

Manitowoc repair questions

Our Manitowoc shows a long harvest fault. Is it broken?

Not necessarily. A slow harvest usually traces back to scale on the evaporator, and descaling often fixes it. If the machine is clean and still faults, we test the harvest components and the water system.

Can you service an Indigo NXT?

Yes. Its display gives us useful fault history and settings. Note what it shows before you reset it, because clearing the message loses that information.

Is it worth repairing an older Manitowoc head?

Usually, for water, harvest and control faults. When a hard-working head needs a compressor or is leaking refrigerant, you get the repair price and our honest take on replacing it, and the decision is yours.

Do you need roof access for our remote condenser?

Often, yes, if the symptoms point to heat rejection. Let us know when you call how access works, such as a ladder, a roof hatch or a locked door, so we plan for it.

Manitowoc acting up?

Tell us the model and the symptom. A person answers 24/7.

Call now, 24/7(210) 939-3313Book online