Perlick appliance repair in San Antonio, TX.
Phones staffed 24/7Three-hour arrival window90-day parts warranty
- Diagnosis
- The failed part is found before any price
- Approval
- No work begins without your okay
- Hours
- Calls answered day and night
- Warranty
- Parts 90 days · labor 30 days
Book online
Send the basics. A dispatcher calls you back.
- 1Describe the problemYour ZIP code, the appliance, and the trouble it is giving you.
- 2Pick up when we callWe confirm the address and set a three-hour arrival window.
- 3Get one priceThe technician diagnoses it, then quotes parts and labor together. The diagnostic fee is credited if you go ahead.
Would rather explain it out loud? Call us any hour, any day.
Schedule a repair
Step 1 of 2 · Appliance and area
Light commercial
Perlick appliances we repair
What fails most on Perlick
- Front grille blocked so the condenser overheats
- Door or drawer gaskets that stopped sealing
- Draft problems in the lines, CO2 or faucets
- Glycol circulation faults on long-draw systems
- Shallow cabinets losing the evaporator fan or the drain
Perlick, plainly
What usually goes wrong
Perlick is a Milwaukee company with a long history in bar and beverage equipment, and it also makes a residential line. At home it is probably a Perlick under-counter refrigerator, beverage center, wine unit or ice machine fitted into a bar, island or outdoor kitchen.
- Refrigerator
Drinks are cool, not cold, and the unit hardly ever shuts off.
The usual story is a dusty condenser or a front grille whose air path is blocked. Once it can breathe, it typically goes back to normal cycling.
- Wine Cooler
Moisture or frost is collecting on the inside back wall.
A door that does not seal well lets humid air in, which condenses on the cold surfaces. Worn gaskets or a door knocked out of line are the usual reasons.
- Ice Maker
The bin holds small clumped pieces instead of separate cubes.
The usual cause is a dirty filter or scale in the water system, and San Antonio's hard water speeds it along. A slow bin drain also lets ice melt and refreeze into clumps.
- Wine Cooler
One zone holds steady while the other creeps warm.
With dual-zone models, the warm side usually has a fan or sensor at fault. If one zone is fine, the compressor is rarely the problem.
Check this before you call
- Move anything leaning against the bottom-front grille, such as shoes, bags or the edge of a rug.
- Close the door on a dollar bill and tug it; where it slides out without any grip, the seal is weak.
- Check that a knee or a curious child has not nudged the temperature setting.
- On an ice maker, check that the water valve is open and the supply line has no kinks.
From our technicians
Working on Perlick equipment
Perlick shows up in two very different settings around San Antonio. One is the commercial bar, where back-bar coolers and bottle chillers run all day behind the counter. The other is the home: a Signature Series under-counter fridge in a kitchen island, a wine unit in a Stone Oak game room, or a beverage drawer in an outdoor kitchen on a Boerne patio.
Either way the Perlick is diagnosed first and you get one quote covering parts and labor, and nothing is touched until you give the go-ahead. For a Perlick part that must be ordered, we give you the wait and set up the return visit before we go. Commercial customers get a written note of the work.
We do not perform manufacturer-warranty work and do not claim health-code certification.
What sets Perlick apart
Perlick, based in Milwaukee, grew up in bar equipment: under-bar and back-bar coolers, bottle and glass chillers, and draft beer systems. Its residential Signature Series brings that background into homes as built-in under-counter refrigerators, wine units, refrigerator drawers, beverage centers and ice makers. A Perlick under-counter unit fits flush into a bar or cabinet run and draws air through a bottom-front grille, and its shallow cabinet keeps very little cold in reserve. Draft systems are their own category, with a glycol chiller, lines, tower, faucets and CO2 all in play.
We ask up front whether the Perlick is behind a commercial bar or set into a home kitchen or outdoor bar, because the two calls need different preparation. On a warm unit we check the front grille and door seals before suspecting the sealed system. On a draft complaint we look at the lines, gas and faucets as closely as the cooler itself.
Front-breathing units and Texas heat
Air goes in and out of a Perlick under-counter unit through the grille along its bottom front. There is no space behind it to help. Cover the grille with a rug, stacked cases, a pet bed or a toe-kick panel not cut to let air through, and the condenser overheats. The unit runs nonstop and drinks are cool instead of cold.
Outdoor kitchens raise the stakes. On a San Antonio patio in August, the air around the unit can be well past 100 degrees, and dust and pollen collect on the condenser fast. An outdoor Perlick has to be a model rated for outdoor use, its grille needs to stay clear, and in summer it will work a lot harder. When a Perlick struggles in July, a coil cleaning and clear airflow usually fix more than any part.
Draft beer: the cooler is only part of it
A complaint like foamy beer, flat beer or warm pours can live in many places. The CO2 regulator may be set wrong or the tank may be low. The lines may need cleaning. A faucet may be sticking. On long-draw systems the glycol chiller and its pump keep the lines cold all the way to the tower, and a weak chiller shows up as foam at the tap even when the keg cooler is fine.
We check the gas, the lines, the faucet and the glycol loop alongside the cooler, so you are not paying for refrigeration work when the fault is a regulator.
Seals, fans and shallow cabinets
With so little cold mass in a shallow cabinet, a weak door gasket or a drawer that does not shut square shows up quickly as frost on the rear wall or warm product near the door. Evaporator fans and small drain lines are the other frequent repairs. These are serviceable parts, and Perlick builds its units to be repaired in place rather than replaced.
What to tell us when you call
Let us know whether the unit is commercial or Signature Series, indoors or outdoors, and whether it will need to slide out of finished cabinetry. Have the serial label ready, usually inside the cabinet on an upper side wall, and if it is a draft system, tell us how far the tower is from the cooler.
Questions
Perlick repair questions
My Perlick in the outdoor kitchen cannot keep up in summer. Is it failing?
Often it is not. Outdoor heat, sun on the cabinet and a dusty condenser make any under-counter unit struggle. We clean the condenser, check the grille and seals, and then test the system if it still cannot hold temperature.
Our draft beer is pouring foamy. Do you need to fix the cooler?
Maybe not. CO2 pressure, dirty lines, a sticking faucet or a weak glycol chiller cause foam as often as the cooler does. We check each one.
Does my Perlick have to come out of the cabinetry?
Only when the repair cannot be reached from the front of the unit. We cover the nearby cabinets and floors, and if it looks like the unit has to come out, we tell you beforehand.
My bar fridge is warm. Does that mean the compressor is gone?
Usually not. With a built-in Perlick, the usual faults are worn door seals and blocked airflow, which are far more common and much easier to fix. We check those first.
Will my Perlick have to come out of the cabinetry?
Sometimes, if the repair cannot be done from the front. We protect the woodwork and floor, and we let you know ahead of time if removal looks likely.
Perlick acting up?
Tell us the model and the symptom. A person answers 24/7.